It has been discussed on the first page of this thread, or you can wait for pictures like I have to wait 18 more days!
Announcement
Collapse
No announcement yet.
Charlyne 95 Z28 M6
Collapse
X
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
-
Too far scroll back, lol. Gonna be noice!! Where you buying from?Originally posted by Fox Slaughter View PostIt has been discussed on the first page of this thread, or you can wait for pictures like I have to wait 18 more days!sigpic
o·vr·kill [oh-ver-kil]1. an excess of what is required or suitable, as because of zeal or misjudgment.
Comment
-
I'll say OPTI since I know you have talked about it before, OPTI or Rear end... either way good move.sigpic
1992 Chevy Camaro 25th Anniversary-SOLD
1992 Chevy Camaro 25th Anniversary
1997 Chevrolet Corvette
The Original
Originally posted by meissenI actually agree with Darren on everything he said...Originally posted by 81DaytonaPaceCarYep, pretty much...not too often I agree 100% with Darren, but there it is...
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Hahaha Opti not yet maybe never rofl.
Rear End.
Gonna order a S60 from Strange.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
-
Check our CRP in Kansas if you're not committed....Carl is good people. Shot me a good price too!Originally posted by Fox Slaughter View PostHahaha Opti not yet maybe never rofl.
Rear End.
Gonna order a S60 from Strange.sigpic
o·vr·kill [oh-ver-kil]1. an excess of what is required or suitable, as because of zeal or misjudgment.
Comment
-
I was going to say, does that thing even have an upgraded clutch in it yet??Originally posted by ThreeHonks View Postlook like you are building the car the right way - from the back forward!
Ive been beating the snot out of my 10 bolt with 370rwhp and a bitey clutch and its been mint so far
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
don't start there, then he'll start building it backwards just like everyone else around hereOriginally posted by JoeliusZ28 View PostI was going to say, does that thing even have an upgraded clutch in it yet??
Ive been beating the snot out of my 10 bolt with 370rwhp and a bitey clutch and its been mint so far 
. I wish I would have done things in the order hes approaching them but its all relevant to the purpose of the car.
Doing less with more

Comment
-
put a drag radial on that car or a slick and give it a few good launches with some wheel hop, im sure it will popOriginally posted by JoeliusZ28 View PostI was going to say, does that thing even have an upgraded clutch in it yet??
Ive been beating the snot out of my 10 bolt with 370rwhp and a bitey clutch and its been mint so far 
Comment
-
Nothing backwards about what im doing if i dont put a drag tire on itOriginally posted by DETROITMUSCLE View Postdon't start there, then he'll start building it backwards just like everyone else around here
. I wish I would have done things in the order hes approaching them but its all relevant to the purpose of the car.
10 bolt is fine for my needs.
Exactly. I am betting that after my weight reduction and suspension is done, the 10 bolt will even hold up to some pretty stout launches.Originally posted by ThreeHonks View Postput a drag radial on that car or a slick and give it a few good launches with some wheel hop, im sure it will pop
Last edited by JoeliusZ28; March 2nd, 2011, 11:47 AM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Too bad that built t56 isn't in there anymore, that would have made a great combo with the s60.
2011 Mustang GT
20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete
In Progress: Brembo 6-piston brake upgrade
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
I plan on running Drag Radials, probably not a slick.
As for the Trans that is the next step, plus clutch.
Then comes the engine.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
Interior Whore
- January 21st, 2008
- 6380
- fred
- 1996 Camaro z28
- U.P. and over you.
- united states coast guard
- Send PM
youll have better luck with a et street (basically a slick) then drag radials with a m6Originally posted by Fox Slaughter View PostI plan on running Drag Radials, probably not a slick.
As for the Trans that is the next step, plus clutch.
Then comes the engine.wishing i could drive like joe and the atm squad
Comment
-
x2.Originally posted by munsterz28 View Postyoull have better luck with a et street (basically a slick) then drag radials with a m6-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment


Comment