If i can help it im putting that off until the full rebuild. My engine bay is pretty much a wreck, i want everything looking new, not just a few bits and pieces.
Announcement
Collapse
No announcement yet.
Project: PBR-Built Z/28
Collapse
X
-
Last edited by JoeliusZ28; June 18th, 2015, 05:49 PM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
-
Replaced the spark plug today. Much much better, not perfect though. Still getting some hickups in the low RPMs like it needs new plugs/wires. Plug wires look like they didnt get bothered by the fire though. I realized i forgot to gap the new plug i might give that a try tomorrow. In any case the car seems to be drivable now, so thats good!-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
I can change wires in 30 minutes on this car problem is theyre expensive. (Considering i have 24x stuff on the shelf...)Last edited by JoeliusZ28; June 20th, 2015, 11:57 PM.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
So this weekend i am going to attempt to diagnose the remaining missfire issue. I also found my tuning cable and ordered a mechanical vacuum gauge which i think will be useful.
Plan is to get my tuning laptop up to speed and maybe tweak my tune some.
also if i can get the bugs worked out of this thing the way it is i am *very* tempted to toss this 230/238 cam in ive got sitting on the shelf for the hell of it. Its a gamble whether or not it will work well (better than what i have now) with my heads.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Post Whore
- August 16th, 2007
- 2881
- Jim
- 2002 Camaro Z28, 1994 Firebird Formula
- Traverse City, MI
- Send PM
-
Seems like some diaelectric grease on all the plugs was all that was needed to tune up the missfire. Shes running strong again!
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Nice!2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
Agreed. Although im not sure what the fire had to do with the connection within the spark plug boot when the wires look fine, but ... whatever
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Post Whore
- December 5th, 2007
- 1321
- Scott Lenard
- 1994 Z28
- Macomb, MI
- Web Director at dieselops.com
- Send PM
1994 Z28 Black, M6, Hardtop, SLP Loudmouth I, GM Performance Cold-Air Intake, 96-97 SS spoiler, 17" x 9.5" Chrome Z06 Motorsports, Longtubes

"It's not who I am underneath, but what I *DRIVE* that defines me."
Comment
-
I honestly never had any di-electric grease on it in the first place and it was fine, but had there been any... absolutely.Originally posted by Lucky SOB View PostI would think the heat could liquify the grease and make it run out.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment


Comment