Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Announcement
Collapse
No announcement yet.
I bought my old 93 Z28 back, now it needs some TLC
Make them yourself of you can buy Blackbird Lighting Solutions. Expensive!!!!!!
True Projectors look stupid to me in a Fbody.
They look stupid because its a square housing with just a round projector slapped in the center.
Here is the BLS.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Last edited by mcalus; February 26th, 2013, 08:26 PM.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Tonight I got the Dakota digital box all wired up. There is a nice little cubby it can go into too! I still need a 10k ohm resistor, of course I had every other resistor made but that's the way it goes right?
Also got the alternator bolt up. Couldn't get the belt back on by myself so that'll have to wait :/
Engine bay is filthy!
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Whoa whoa wait. You can't get a belt on by yourself? What kind of mechanic are you?
Put the belt in from the top, put it on the alternator, get the routing right. Get under the car, 14mm box end on the tensioner, slip the belt over the crankshaft. Adjust belt as needed to fit correctly.
Originally posted by Yoshi94
Mines about an inch bigger than Kyles. I need to get one of those
Originally posted by ryanwarby01
Put it this way, if you have a money tree a LT1 is a wood chipper!
Whoa whoa wait. You can't get a belt on by yourself? What kind of mechanic are you?
Put the belt in from the top, put it on the alternator, get the routing right. Get under the car, 14mm box end on the tensioner, slip the belt over the crankshaft. Adjust belt as needed to fit correctly.
Relax homie. Let me reword it, I couldnt get it from the top. I need to put it on all pullys then slide it over the tensioner. The new tensioner and belt are both new, there isn't much play room. not enough room in garage to get under itwith the door closed. And it was snowing balls out.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Well try routing it all then putting it on the crank last.
Snow smow flow. I remember back in my day working on cars in 2ft of snow with the wind blowing vertical and walking to the parts store 20 miles up hill both ways.
Remove the AC and powersteering and low mount the alternator.
Originally posted by Yoshi94
Mines about an inch bigger than Kyles. I need to get one of those
Originally posted by ryanwarby01
Put it this way, if you have a money tree a LT1 is a wood chipper!
DO NOT SELL THIS CAR!!!!! And Interior looks really good Mike. I have 8k 9006 HID's siliconed to my stock glass housings and i don't get flashed that bad they are bright but the glare isn't horrible. And those links of housings posted only fit 3rd gens not 4th gens.
Last edited by white97z28; March 2nd, 2013, 06:41 PM.
1999 z28 Bright Blue Metallic 1 of 10
1999 z28 Hugger Orange RS 1 of >309 (Sold)
1997 z28 White 6 speed Heads and Cam. (Sold)
1994 z28 PPM auto Cam only (Sold)
1984 sport coupe red 4 cyl (Sold)
DO NOT SELL THIS CAR!!!!! And Interior looks really good Mike. I have 8k 9006 HID's siliconed to my stock glass housings and i don't get flashed that bad they are bright but the glare isn't horrible. And those links of housings posted only fit 3rd gens not 4th gens.
Took Nicks advice. Bought some hid's. Nick sold me on the 4500k's. I got just lows, if I like them enough I'll do the high beams too.
I got the 10k ohm resistor I needed for the Dakota box. I'll get that wrapped up today.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
1999 z28 Bright Blue Metallic 1 of 10
1999 z28 Hugger Orange RS 1 of >309 (Sold)
1997 z28 White 6 speed Heads and Cam. (Sold)
1994 z28 PPM auto Cam only (Sold)
1984 sport coupe red 4 cyl (Sold)
Interested to see how they work. I bought some really nice basically brand new OEM lights for bank$$$ and they still suck. Once this things back together I want to go over the lighting of the car again.
My car has has silverstars installed by the previous owner. They work fine and i hope they continue to last... Theyve been working for at least 10 years now.
My car has has silverstars installed by the previous owner. They work fine and i hope they continue to last... Theyve been working for at least 10 years now.
thats a long while...I know they still make them too
'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Tweet
Comment