hp/tq/ and 1/4 with a 76mm/78mm turbo

[1BADAIR]

huron speed tractor kits?

[OVRKILL]

welcome to the world of turbo's mike... its not as cheap as what u think it is..

especially in pairs, huh?

[Nocooler]

I knew it wasnt cheap. Just trying to be at the point where it might come out by the end of next summer. Is that $700 turbo rebuildable?

Sent from my SPH-D710 using Tapatalk 2

I'm 99% sure all turbonetics are rebuildable.

[Superman09]

You can have Turbonetics rebuild it if you need.

Those prices are CHEAP! You should see what some other turbos cost!

I wouldn't put anything less expensive than a Turbonetics on the car. If so you will really be sacrificing power as well as quality of the turbo.

[Superman09]

huron speed tractor kits?

Currently in development stages

[kammi10]

You can have Turbonetics rebuild it if you need.

Those prices are CHEAP! You should see what some other turbos cost!

I wouldn't put anything less expensive than a Turbonetics on the car. If so you will really be sacrificing power as well as quality of the turbo.

its true.. list price onthe bullseye i have is like 13xx

[hoogiesngrinderz]

its true.. list price onthe bullseye i have is like 13xx

wow..

[Formula Z]

Considering putting my stock 3.23s back in also. So my 3.73s may be up for grabs. What difference would this make going turbo/80e besides the obvious rpm/mpg

Sent from my SPH-D710 using Tapatalk 2

[c0ncEpT]

The lower gears load the motor more. Quicker spool. Not to mention you'll be able to put more power in at the hit with the lower gear.

[Formula Z]

nice! gonna have to pull it and take it back into work and have it swapped out. or i may just have to hold out for a bit as something else is in the works. car might not make it out next year so i have a little bit of time to make it right. still not going with a cage so my options may be a little slim. thx mike!

[Nocooler]

What's wrong with a roll bar? Should have sat in my car with it......or better yet Jim's he has swing outs. Unless your carting midgets around the back seat is worthless.

[Formula Z]

nothing besides more money. its not a racecar, just a streetcar

[Formula Z]

Re: hp/tq/ and 1/4 with a 76mm/78mm turbo

What has to ne done to get a double roller timing chain behind front cover? Looking at a chain pump combo from slp on summitracing

Sent from my SPH-D710 using Tapatalk 2

[1BADAIR]

Slp should fit. Comes with shims, bolts and the pump is diff. Stock pump would need some grinding on the cover , bolts and shims

[Boost Addict]

After doing some reading I went with the LS2 timing set due to function and price. PM me if you're interested in details. I'm using the Melling hi pressure pump.