Huron Speed A/C Turbo Kit - Another Reason to Tear Into It

[BlackBirdDaddy]

Plan on using your 3600 Yank? Sticking with the 10 bolt w/ 3.73's also?

Mike, I'm going to stick with the Yank stall for now but was thinking about swapping the rear for with the ol' 3.42 I have sitting in the corner. I think it only has 14k miles on it or so, right Brent?

I had he 3.42 in the car at one point but never had it under power. Then found a complete 3.73 which work out rather well with the old configuration.




Current 3.73










Ol' 3.42

[Superman09]

wow, working on your car I don't even think I could get dirty!

[OVRKILL]

Mike, I'm going to stick with the Yank stall for now but was thinking about swapping the rear for with the ol' 3.42 I have sitting in the corner. I think it only has 14k miles on it or so, right Brent?

....to be exact

[BlackBirdDaddy]

Brent you ........ I worked on the water bottle today and what a pita that is! I scuffed it and tried to straighten the surfaces out a little but that plastic material gets "fuzzies" when you sand it. I used many coats of filler primer. Needless to say it is not going black!














I found headlamp housings that accept a HID bulb. Now they should match my fogs.

[Atrus]

On pins and needles for updates and pics

[Superman09]

Here is a nice update.....

CT43 7879. BILLET Wheel, ceramic Ball Bearing, OIL-LESS, 1.15 a/r, polished housing, blanket








No Oil Required!

[hoogiesngrinderz]

price?

[Superman09]

price?

For the turbo? PM coming!

[OVRKILL]

Brent you ........ I worked on the water bottle today and what a pita that is! I scuffed it and tried to straighten the surfaces out a little but that plastic material gets "fuzzies" when you sand it. I used many coats of filler primer. Needless to say it is not going black!

Pssssch.....rookies

....keep working on it, it'll get better.

[Darren]

Keep in mind Brent just slips his body guy a $50, or a couple

[BlackBirdDaddy]

Here are some minor items that I can use for updates.




Mounted the alternator and fit the f/r cover.








Finalized the paint on the radiator support cover. Needs sanding and polishing now.








Cut plastic lens off the fog lamp housing and going with a 1/4" piece of glass. The HID's abused the old plastic lense.








Organized some of the wiring

[OIF1VET]

Looks GREAT!

[Formula Z]

Yeah it does. I sure hope nobody is looking forward to my build lol. Mine is just going to hopefully work. I don't have the time, patience, or cash for A build of this sort

Sent from my SPH-D710 using Tapatalk 2

[BlackBirdDaddy]

Santa slid down the chimney a little early this year........

[OVRKILL]

Hey this is thread is alive! Barely....but alive.