Project round two: 1992 Chevy Camaro

[85z28kid]

At the rear otherwise nasty fumes under the hood

[Darren]

K. I have a brand new canister, just no way of securing it and having it stock. You can sell that on ebay for a few bucks, I just need the metal off the bottom and the bolts.

TBI or carb? There should be three lines coming up the driver side frame rail - feed, return, and vent. I'd run a line away from the exhaust and then top it with a small vent filter.

Its TBI at the moment

At the rear otherwise nasty fumes under the hood

I agree, that is probably what I will end up doing.

[Gregs_gsxr]

Cap it and run a vented gas cap probably safer that way

[Darren]

Cap it and run a vented gas cap probably safer that way

I need to get rid of my retarded locking gas cap anyhow, this would be a good reason to buy a new one.

[Gregs_gsxr]

I need to get rid of my retarded locking gas cap anyhow, this would be a good reason to buy a new one.

ditto, im going to be doing the same thing

[Curt_irocz]

any pics of primer???

[Darren]

any pics of primer???

not really the whole car has not been primed yet, just the hood and most of that has actually been blocked off by now. Still have some work to do on both rear quarters, the doors are done (as good as they are going to get) ready to be primed and the hood is done as well. I still need to figure out how to tackle the front nose and rear bumper cover, looking up good body threads on TGO for pointers and tips. With tax season coming up I am hoping to buy the primer, sealer and paint soon and figure out this painting mess.

[Gregs_gsxr]

use light pressure when sanding on the bumper covers, other wise your gonna keep chasing "low" spots
best to work on those when they are mounted on the car, then you can pull them back off to prime and / or paint.

are you shaving anything on the covers ?

[TylerT/AZ28]

my caps locking and i took my canister off. makes the the vehicle small like gas because its open so put a filter on it to trap some of the fumes

[Darren]

use light pressure when sanding on the bumper covers, other wise your gonna keep chasing "low" spots
best to work on those when they are mounted on the car, then you can pull them back off to prime and / or paint.

are you shaving anything on the covers ?

what do you mean shaving anything on the covers? If your talking the camaro symbol or anything like that then no I plan on keeping it stock appearing. I am on the search for new exterior lights or something different in those areas. Also a 25th Anniversary badge for the rear decklid but thats supper expensive if you can find one.

my caps locking and i took my canister off. makes the the vehicle small like gas because its open so put a filter on it to trap some of the fumes

yes a filter on one of the ends or a vented gas cap will fix that issue. I am more so doing it to clean the engine bay up and make room.

[TylerT/AZ28]

room for what?

[Gregs_gsxr]

then prepping the covers is just like the rest of the body then as long as there isnt any major damage, but I dont think there was from your pics before

[Gregs_gsxr]

room for what?

flux turbos......duh

[TylerT/AZ28]

ahhh i thought we were gonna pimp it out with a blender right there or something. maybe a tv

[Gregs_gsxr]

ahhh i thought we were gonna pimp it out with a blender right there or something. maybe a tv

if you do a blender, you gotta have room for the mini fridge...player !