Nocooler's 00 Firebird

[Nocooler]

Is that the trick? I'm not ready to install the trans.....but I was looking at it after I installed the flexplate.

Thanks Ricky

[Boost Addict]

Made a plate to cover the hole in floor - and mount the shifter too. Looks like I need some 1" square tubing to raise the shifter up, I have round but no square

Flexplate is mounted - is it me or are the torque converter bolts a ***** to get to?

Put 2 of my -6an fitting on and put my -6an fittings in the trans

Tried figuring out where to mount the trans cooler - damn there is no room. Maybe I shouldn't have bout the big one

You got the starter out right?

[Nocooler]

Made a plate to cover the hole in floor - and mount the shifter too. Looks like I need some 1" square tubing to raise the shifter up, I have round but no square

Flexplate is mounted - is it me or are the torque converter bolts a ***** to get to?

Put 2 of my -6an fitting on and put my -6an fittings in the trans

Tried figuring out where to mount the trans cooler - damn there is no room. Maybe I shouldn't have bout the big one

[Nocooler]

T56 is out.

[Nocooler]

Transgo kit is installed - hopefully I did it right

New internal trans harness is in - and the trans is all back together. Damn I need a fork lift to move this thing

My brain has been mush for the past few days. Dr. and I decided it was time to try lowering the dosage of my antidepressants, 1st stage went fine - but this second stage has been rough.

Had to install the a/c unit in the garage - went from hot to almost bearable

[Nocooler]

Should have everything on the way......just need fluids etc.

And some damn motivation to work on the thing.

[Nocooler]

Baller? It was almost $200 cheaper than the FTI

[DETROITMUSCLE]

what a baller, they are def some good guys over there.

[Nocooler]

Ordered a converter this afternoon - I made the mistake of calling PTC.

10" billet single disc - shooting for 3800-4000 on the engine

[Nocooler]

I think it was his Vig before he figured out it was sucking the pan dry

[DETROITMUSCLE]

Mine was around 4200. 2-3 shift it would go to the moon lol. 1800 rpm slip at the line. Was fun on the street though

The ridings or the Vig?

[1BADAIR]

Mine was around 4200. 2-3 shift it would go to the moon lol. 1800 rpm slip at the line. Was fun on the street though

[Nocooler]

^Lol.

[c0ncEpT]

Deep pan on car...It did pick up almost 40hp after the first time they tightened it

Sounds like you were sandbaging when you gave them the specs lol "Yeah its just an LT1, Maybe 325RWHP ya know"

[FASHOOTER]

Deep pan on car...It did pick up almost 40hp after the first time they tightened it