Announcement

Collapse
No announcement yet.

Gaspo's 99 trans am project

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    does that look like bad headgasket?
    98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

    Comment


    • #62
      Looks like someone didn't drain the heads before they pulled them.

      Make sure to get the bolt holes cleaned and dried out.
      2000 Formula
      fixed slow junk

      Comment


      • #63
        Originally posted by Nocooler View Post
        Looks like someone didn't drain the heads before they pulled them.

        Make sure to get the bolt holes cleaned and dried out.
        i assumed it was already drained since the heads were almost off.. do you guys think i need to pull the cam out and inspect it or no? does the oil pan need to come off and be checked for shavings?
        98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

        Comment


        • #64
          Clean that coolant out of the cylinders asap - and take another picture, if water has set in it - it'll have rust.

          Did the you hear water hitting the ground and filling the cylinders when you pulled it?
          2000 Formula
          fixed slow junk

          Comment


          • #65
            Originally posted by Nocooler View Post
            Clean that coolant out of the cylinders asap - and take another picture, if water has set in it - it'll have rust.

            Did the you hear water hitting the ground and filling the cylinders when you pulled it?
            Ya, water definitely came out and poured all over
            98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

            Comment


            • #66
              Originally posted by Gaspo View Post
              Ya, water definitely came out and poured all over
              Okay - it's not a bad headgasket then.
              2000 Formula
              fixed slow junk

              Comment


              • #67
                what springs are in it? i will have a new set of patriot golds(springs only no retainers or seats) available soon

                Comment


                • #68
                  Originally posted by 1BADAIR View Post
                  what springs are in it? i will have a new set of patriot golds(springs only no retainers or seats) available soon
                  thanks, but i'm picking up daves complete livernois stage 2 heads tomorrow.
                  98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                  Comment


                  • #69
                    Originally posted by Gaspo View Post
                    thanks, but i'm picking up daves complete livernois stage 2 heads tomorrow.
                    sigpic
                    U.S. Army 1983-2005
                    11.20@122.37 1.51 60'

                    Originally posted by WMCCjames

                    "Plans Subject to change upon Sobering up"

                    Comment


                    • #70
                      Originally posted by OIF1VET View Post
                      you know me larry
                      98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                      Comment


                      • #71
                        Originally posted by OIF1VET View Post
                        lol

                        Comment


                        • #72
                          i'm getting my rockers ready for the truniion upgrade. gonig to take the old ones out. got the drivers side head and the retainer on the number 7cylinder is also dented/ messed up. so number 4 and number 7 were screwed up. and they were both EXHAUST side. what does that mean?

                          i'm pretty sure this car has been boosted before. the front bumper has a notch in it, the hood has a notch in it on the opposite side of the latch for pipe to go thru, the fog lights are out..
                          98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                          Comment


                          • #73
                            Sorry if I missed it, but did you end up selling your Camaro?
                            sigpic

                            355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

                            Comment


                            • #74
                              Originally posted by ryanwarby01 View Post
                              Sorry if I missed it, but did you end up selling your Camaro?
                              yes, a member on here got it
                              98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                              Comment


                              • #75
                                i'm getting my rockers ready for the truniion upgrade. gonig to take the old ones out. got the drivers side head and the retainer on the number 7cylinder is also dented/ messed up. so number 4 and number 7 were screwed up. and they were both EXHAUST side. what does that mean?
                                98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                                Comment

                                Working...
                                X