Announcement

Collapse
No announcement yet.

Project round two: 1992 Chevy Camaro

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Darren
    replied
    Originally posted by NullHead View Post
    So, important question, is the brake boosted hooked up?
    I believe it is correct. But I have a hard peddle car not running start the car push the peddle you hear lots of air and peddle goes to floor... Any ideas?

    Greg the car isn't drivable above 3000 rpm it bogs down falls on it's face deal. Needs to be dialed in or different jets/pump.


    Sent from my iPhone 5 on iOS7 using Tapatalk

    Leave a comment:


  • Gregs_gsxr
    replied
    then what did you mean you can't drive it open at 3k rpm...you mean open exhaust ?

    Leave a comment:


  • Darren
    replied
    Um no it idles fine. Idles about 700rpm


    Sent from my iPhone 5 on iOS7 using Tapatalk

    Leave a comment:


  • Gregs_gsxr
    replied
    yea thats a no no, what is going on with these SBC's that want to idle at 3k plus maybe its a falling gasket on the intake side ?

    Leave a comment:


  • Darren
    replied
    Project round two: 1992 Chevy Camaro

    Sounds like I need to do carb work now too... I thought this was suppose to be easier!

    Didn't have any brakes and can't drive it over 3000 rpm


    Sent from my iPhone 5 on iOS7 using Tapatalk
    Last edited by Darren; June 28th, 2014, 12:56 PM.

    Leave a comment:


  • Gregs_gsxr
    replied
    didn't he say he drove it and found out he didn't have much of a brake pedal

    Leave a comment:


  • Curt_irocz
    replied
    Originally posted by Darren View Post
    Id assemble it tomorrow if it was drivable.

    Excuses

    Leave a comment:


  • NullHead
    replied
    So, important question, is the brake boosted hooked up?

    Leave a comment:


  • Darren
    replied
    Yes Jon slowly but surely it's getting close. Id assemble it tomorrow if it was drivable.


    Yes B I was able to stop. I had some brakes combined with the e brake. I hope they just need to be bled... Again


    Sent from my iPhone 5 on iOS7 using Tapatalk

    Leave a comment:


  • meissen
    replied
    Hopefully you were able to stop??

    Leave a comment:


  • bigjon88
    replied
    We will get her done soon enough

    Leave a comment:


  • Darren
    replied
    Well I drove the car today... Learned a important thing.... My brakes do not work


    Sent from my iPhone 5 on iOS7 using Tapatalk

    Leave a comment:


  • Darren
    replied












    Last edited by Darren; June 25th, 2014, 01:08 PM.

    Leave a comment:


  • bigjon88
    replied
    Bump

    Leave a comment:


  • Blue04ss
    replied
    Looking good man!! Keep up the good work!!

    Leave a comment:

Working...
X