Announcement

Collapse
No announcement yet.

1996 Camaro Z28 LT1 Project

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Konis!
    Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

    "You shall ride eternal. Shiny and chrome."

    Comment


    • eh, too expensive.

      What do you guys think of these?
      http://www.stranoparts.com/partdetai...D=10&ModelID=2

      1996 Camaro Z28 cam, heads, stall, and a few other goodies
      Alumni Member, MSU Racing Club
      THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
      Originally posted by JasonH
      It's amazing what you can get done when you throw copious amounts of money at something.

      Comment


      • I haven't called Sam Strano yet, but I've been hearing a lot of good about the SLP Bilsteins from other boards. I think that's the way I'm gonna go.

        1996 Camaro Z28 cam, heads, stall, and a few other goodies
        Alumni Member, MSU Racing Club
        THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
        Originally posted by JasonH
        It's amazing what you can get done when you throw copious amounts of money at something.

        Comment


        • Originally posted by alone_and_insane View Post
          eh, too expensive.
          You pay for excellence.

          Craig has Konis and Strano springs, and the thing rides and handles like a dream.
          Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

          "You shall ride eternal. Shiny and chrome."

          Comment


          • I realize konis are the best I can get, but for the current status of my finances and all the other things that the car needs before shocks (paint is #1 on the list), I don't feel like I can justify spending that kind of money. It's not like this car is gonna be racing at Milan every weekend either.

            1996 Camaro Z28 cam, heads, stall, and a few other goodies
            Alumni Member, MSU Racing Club
            THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
            Originally posted by JasonH
            It's amazing what you can get done when you throw copious amounts of money at something.

            Comment


            • your doing more than I would have. Im an autozone kind of guy.

              Can most people really drive the car past its engineered limit to the point where they NEED aftermarket? I always ask my self that question.

              I wish I had your exhaust.
              1998 Chevrolet Camaro Z28 - 6 Speed

              Comment


              • Originally posted by nascarnate326 View Post
                your doing more than I would have. Im an autozone kind of guy.

                Can most people really drive the car past its engineered limit to the point where they NEED aftermarket? I always ask my self that question.

                I wish I had your exhaust.
                Honestly, the biggest reason that I need the aftermarket shocks is because of the lowering springs, not to mention the fact I want to try my hand at autocross sometime this summer.

                Also, my exhaust isn't quite done yet. it still needs a couple of things straightened out, and I'm gonna add either an x-pipe or an h-pipe

                1996 Camaro Z28 cam, heads, stall, and a few other goodies
                Alumni Member, MSU Racing Club
                THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                Originally posted by JasonH
                It's amazing what you can get done when you throw copious amounts of money at something.

                Comment


                • X pipe. If memory serves me correctly X pipes create scavenging and a H-pipe just will balance out the two sides.
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment


                  • what does it mean to "create scavenging?" and what would be the price difference between an H-pipe and an X-pipe?

                    1996 Camaro Z28 cam, heads, stall, and a few other goodies
                    Alumni Member, MSU Racing Club
                    THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                    Originally posted by JasonH
                    It's amazing what you can get done when you throw copious amounts of money at something.

                    Comment


                    • Scavenging is an effect that basically "pulls" exhaust gases out of the head.
                      Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

                      "You shall ride eternal. Shiny and chrome."

                      Comment


                      • random question: do those LT1 throttle body airfoils actually do anything?

                        1996 Camaro Z28 cam, heads, stall, and a few other goodies
                        Alumni Member, MSU Racing Club
                        THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                        Originally posted by JasonH
                        It's amazing what you can get done when you throw copious amounts of money at something.

                        Comment


                        • Yeah, a little bit.
                          Gone but not forgotten: 1986 Chevrolet Camaro IROC-Z

                          "You shall ride eternal. Shiny and chrome."

                          Comment


                          • alright. I found a pretty cheap one on ebay (under $20 shipped), so I think I'll put a bid in for it.

                            1996 Camaro Z28 cam, heads, stall, and a few other goodies
                            Alumni Member, MSU Racing Club
                            THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                            Originally posted by JasonH
                            It's amazing what you can get done when you throw copious amounts of money at something.

                            Comment


                            • I also found a Magnaflow 2.5" X-pipe for under $75. I think I'm gonna call the shop and see where they are on the exhaust. I could probably save myself some money by buying the x-pipe myself.

                              1996 Camaro Z28 cam, heads, stall, and a few other goodies
                              Alumni Member, MSU Racing Club
                              THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                              Originally posted by JasonH
                              It's amazing what you can get done when you throw copious amounts of money at something.

                              Comment


                              • Originally posted by alone_and_insane View Post
                                alright. I found a pretty cheap one on ebay (under $20 shipped), so I think I'll put a bid in for it.
                                I have been thinking about one of those too. Let me know what one you get and if you think its quality work.
                                1998 Chevrolet Camaro Z28 - 6 Speed

                                Comment

                                Working...
                                X