Announcement

Collapse
No announcement yet.

I bought my old 93 Z28 back, now it needs some TLC

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by Fox Slaughter View Post
    HoosierGrinds can burn chips.
    Elaborate?

    I'm pretty sure you can't adjust the speedo with a gear change or tire change on the 93s. You have to do this box so you can manually dial it in or you have to change the gears in the trans to accommodate for the 3.42s.
    2002 Z28 Camaro A4
    1993 Z28 Camaro M6- SOLD
    1999 Z28 Camaro M6- SOLD
    2008 Ford Fusion SE - DD
    -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
    sigpic

    Comment


    • I totally spelled his name wrong haha.
      hoogiesngrinderz
      Mike.

      Can burn the old EPROM chips.

      I don't know if the speedo is ran off the PCM though.
      Originally posted by Yoshi94
      Mines about an inch bigger than Kyles. I need to get one of those
      Originally posted by ryanwarby01
      Put it this way, if you have a money tree a LT1 is a wood chipper!
      sigpic

      Comment


      • I thought that's who you were referring to.

        No the speedo isn't ran off PCM on 93s
        2002 Z28 Camaro A4
        1993 Z28 Camaro M6- SOLD
        1999 Z28 Camaro M6- SOLD
        2008 Ford Fusion SE - DD
        -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
        sigpic

        Comment


        • Gotcha.
          Originally posted by Yoshi94
          Mines about an inch bigger than Kyles. I need to get one of those
          Originally posted by ryanwarby01
          Put it this way, if you have a money tree a LT1 is a wood chipper!
          sigpic

          Comment


          • Got pretty much everything transferred over to the new rear.

            Old gear fluid out-




            New brake lines ran, quick spray job to the sway arm-


            Tomorrow I'll probably respray the calipers maybe the rotor hats and fins.

            Still debating on LCA's.
            2002 Z28 Camaro A4
            1993 Z28 Camaro M6- SOLD
            1999 Z28 Camaro M6- SOLD
            2008 Ford Fusion SE - DD
            -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
            sigpic

            Comment


            • See it looks purtty inside that rear
              Originally posted by Yoshi94
              Mines about an inch bigger than Kyles. I need to get one of those
              Originally posted by ryanwarby01
              Put it this way, if you have a money tree a LT1 is a wood chipper!
              sigpic

              Comment


              • Got everything all put back together.

                We still need to bleed the brakes.

                I left the LCA's just sitting there not bolted in until I figure out what I wanna do. I'll prolly just go with poly polys. Maybe I should quit talking about it and just do it lol


                2002 Z28 Camaro A4
                1993 Z28 Camaro M6- SOLD
                1999 Z28 Camaro M6- SOLD
                2008 Ford Fusion SE - DD
                -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
                sigpic

                Comment


                • Jeez you finally got something done?

                  I am at a stand still until I find a terminal for my fuel pump connector.
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment


                  • That cars gonna be a whole new animal with a 3.42 in it!


                    Comment


                    • Originally posted by Fox Slaughter View Post
                      Jeez you finally got something done?I am at a stand still until I find a terminal for my fuel pump connector.
                      I think I got this tore out and the new one in while you have been waiting on that connector :rollseyes:
                      Originally posted by c0ncEpT View Post
                      That cars gonna be a whole new animal with a 3.42 in it!
                      Exactly what I wanna here. I have never experienced a gear change before.
                      2002 Z28 Camaro A4
                      1993 Z28 Camaro M6- SOLD
                      1999 Z28 Camaro M6- SOLD
                      2008 Ford Fusion SE - DD
                      -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
                      sigpic

                      Comment


                      • Hey I went to Napa, Autozone, O'Reilys, Perfect Products and none of them have it.
                        So to Terminal Supply tomorrow.

                        But yes you got that done before I got my fuel pump and AN lines done haha.
                        Originally posted by Yoshi94
                        Mines about an inch bigger than Kyles. I need to get one of those
                        Originally posted by ryanwarby01
                        Put it this way, if you have a money tree a LT1 is a wood chipper!
                        sigpic

                        Comment


                        • Nice job!!
                          sigpic

                          355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

                          Comment


                          • Lookin good! Roads are still dry... bolt the stock LCAs in and take her for a test spin!

                            Comment


                            • Originally posted by mcalus View Post
                              Exactly what I wanna here. I have never experienced a gear change before.
                              Usually I'd say a gear change in a stalled auto is overrated. But those 2.73 are god awful. I think you'll be more than happy with the gains by going to a 3.42. It should spin from a 40 roll with street tires on it now.


                              Comment


                              • Originally posted by c0ncEpT View Post
                                Usually I'd say a gear change in a stalled auto is overrated. But those 2.73 are god awful. I think you'll be more than happy with the gains by going to a 3.42. It should spin from a 40 roll with street tires on it now.
                                Agreed. Loved the 2.73's on the highway, but I couldn't launch the car. Bog or sideways smoke show

                                1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
                                1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
                                1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc

                                2006 Saab 9-7x 5.3i Daily Driver

                                Comment

                                Working...
                                X