I bought my old 93 Z28 back, now it needs some TLC

[JoeliusZ28]

Looks good but it would be better if you didnt have an elbow at all

[mcalus]

Looks good but it would be better if you didnt have an elbow at all

It's crossed my mind. But maybe I'll convert to a lid once it's running.

[JoeliusZ28]

It's crossed my mind. But maybe I'll convert to a lid once it's running.

Yea I understand not doing a lid, its a pita. But there are other easier setups that should outflow an elbow you can do as well. I know ive said it a million times, but i think the lid and improved manifolds are where the ls1 made most of its power advantage... Not the heads.

[meissen]

Looks good but it would be better if you didnt have an elbow at all

Do you have an ALDL cable? I have one - next time we're both out on Woodward I'd love to data log your car running to see what kind of AFGS you get with your intake. I know that's not going to be an exact method, but it'd be interesting to see none the less.

[mcalus]

Cleared:



In the sunlight:




Edit: couple guys on tech think my no start is a vats issue. Since I had my mail order remove it I'll install my chip then go from there. If that doesn't work I'll pull the starter and get it tested.

[meissen]

Looks good!

[mcalus]

Picked up 2 used tires from Ricky (boost addict) big thank you! I don't mean this in a rude way but has anyone ever told you that you look like McLovin?

Picked up a stock ppm hood from Nick (purple94Z28)

Thank you both! Both great guys!

I plugged in my chip today. Still no start. Pulling the starter tomorrow and getting it tested.

[Boost Addict]

Picked up 2 used tires from Ricky (boost addict) big thank you! I don't mean this in a rude way but has anyone ever told you that you look like McLovin?

ALWAYS. Lol that and someone off of Ferris Buellers Day Off

[my1994z28]

On the starter hookup,you should have 12 volt wire running from battery,purple wire,connects to small post on starter....and there is a thin black wire(i think)that gets grounded to the block...I used oil dip stick bolt....that wire is for the antitheft...if you have it hooked up to the starter,the motor will not start...And if I missed something that was already said,disregard everything I said...LOL

[mcalus]

On the starter hookup,you should have 12 volt wire running from battery,purple wire,connects to small post on starter....and there is a thin black wire(i think)that gets grounded to the block...I used oil dip stick bolt....that wire is for the antitheft...if you have it hooked up to the starter,the motor will not start...And if I missed something that was already said,disregard everything I said...LOL

I think I recall the thin black wire I do have it grounded. Tomorrow I'm going to clean up all my grounds. If that doesn't work the starter is coming off to be tested

[mcalus]

Got to looking at it today. I was just about to start taking off the starter and I noticed there is not 3 but 4 studs coming off the solenoid. I swapped the purple one to the ramaining stud and wouldayaknow lol she turns over!!!

Now to get these darn rockers adjusted :/

[white97z28]

Glad to help out another ppm guy cant wait to see the beast running!!

[mcalus]

Moroso:
http://www.jegs.com/i/Moroso/710/94051/10002/-1

Or

Dynomax:
http://www.jegs.com/i/Dynomax/289/24222/10002/-1


I ran the dynomax on my 99 Z28. Wasn't the best, sounded good a bit raspy between shifts but overall better than stock.

Opinions?

[Boost Addict]

Moroso:
http://www.jegs.com/i/Moroso/710/94051/10002/-1

Or

Dynomax:
http://www.jegs.com/i/Dynomax/289/24222/10002/-1


I ran the dynomax on my 99 Z28. Wasn't the best, sounded good a bit raspy between shifts but overall better than stock.

Opinions?

You should have listened to my car when you were at my house, I have the Dynomax version in 4 inch on my car.

[mcalus]

You should have listened to my car when you were at my house, I have the Dynomax version in 4 inch on my car.

Damn