Announcement

Collapse
No announcement yet.

its a Munster :-D

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • that would defiantly look bad ass but IMO its a lot of $$ for something that already looks fine and it will only make it look even more like a race car with no numbers to back it up as of yet.
    Doing less with more


    Comment


    • Originally posted by DETROITMUSCLE View Post
      that would defiantly look bad ass but IMO its a lot of $$ for something that already looks fine and it will only make it look even more like a race car with no numbers to back it up as of yet.

      very true and i agree with you, and my logic is as of right now im not going to fix something that isnt broke. so as long as my engine is running im not going to drop it and build it quite yet. but with 130xxx+ on a nitrous motor i see a rebuild in my near future. the numbers will come just in time


      let u in a secret too lol to even put headers on the car i need to drop the motor cuz the exhaust manifold bolts were so rusted i busted the heads off the bolts in the back. soo to get the tool in there to pull the bolts out i have to drop the motor pssshhh pain the the ***
      Last edited by MunsterZ28; August 14th, 2009, 04:40 PM.
      wishing i could drive like joe and the atm squad

      Comment


      • Please, PLEASE, paint that hood and spoiler before you do anything else. No one gives a shit about the inside if the outside looks like a mullet mobile.

        2011 Mustang GT
        20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

        In Progress: Brembo 6-piston brake upgrade


        Comment


        • that looks badass.. Reminds me of the gauges from the GrandPrixs though.. being all huge and stuff

          Comment


          • Originally posted by my95z28 View Post
            Please, PLEASE, paint that hood and spoiler before you do anything else. No one gives a shit about the inside if the outside looks like a mullet mobile.

            lol yes yes im going to. but just priced out the gauges on summit. for all autometer nv series gauges to match the ones already in the car it comes to about $745 with shipping. then i have to have a custom peice cut to fit them cost money to be cool


            o and i always liked the 97+ dash layout better so could i pull one even out of a v6 if im doing custom guages and not worry about the wiring? i just want the newer dash so it shouldnt matter? idk meissen wanna chime in? cuz ill go pull a junkyard dash out for all i care right?
            Last edited by MunsterZ28; August 15th, 2009, 12:59 AM.
            wishing i could drive like joe and the atm squad

            Comment


            • besides the dash, you also need the heat/Ac ducts, the air bag is the same.
              I agree with Kyle, get the paint done. Go to the guy that did mine, hood and spoiler cost about 300 to 350.
              sigpic
              1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.

              Comment


              • Originally posted by my95z28 View Post
                Please, PLEASE, paint that hood and spoiler before you do anything else. No one gives a shit about the inside if the outside looks like a mullet mobile.
                im happy with how my car looks, You'd never expect my pos to beat anything till you race me, perfect sleeper

                Comment


                • Originally posted by Plum Nuts View Post
                  besides the dash, you also need the heat/Ac ducts, the air bag is the same.
                  I agree with Kyle, get the paint done. Go to the guy that did mine, hood and spoiler cost about 300 to 350.

                  thought about that, thanks for the help larry!
                  wishing i could drive like joe and the atm squad

                  Comment


                  • bumping this up, edited the first page. heres some of the cliff notes kinda

                    "used summit to base pricing. listed what i have and have a wishlist on summit worth $12,000. things are going to be bought only as things break. so this is going to be a slow process but should be a fun ride when all said and done."

                    "when the engine goes im going with a big solid roller cam and a 383 forged rotating assembly with a set of lt4 heads and a ported intake. up the nitrous jets and 10 seconds or bust."
                    wishing i could drive like joe and the atm squad

                    Comment


                    • Originally posted by DETROITMUSCLE View Post
                      that would defiantly look bad ass but IMO its a lot of $$ for something that already looks fine and it will only make it look even more like a race car with no numbers to back it up as of yet.
                      He's a bolt on away from running what you run.
                      Joe - ATM SQUAD
                      At the shop, watching them build my car.

                      Comment


                      • Fred we can mix some paint and see how it comes out if you want. I have two guns. or we can rattle it.
                        Joe - ATM SQUAD
                        At the shop, watching them build my car.

                        Comment


                        • Originally posted by PWND3r View Post
                          Fred we can mix some paint and see how it comes out if you want. I have two guns. or we can rattle it.

                          i have a small can of paint that i could prob have matched by somebody??? left over from when the painted my quater panel
                          wishing i could drive like joe and the atm squad

                          Comment


                          • And that bolt-on would be??? I trap way higher and I'm an auto.
                            Doing less with more


                            Comment


                            • Doesn't matter what you trap. You still ran a 13. You're an auto and you still ran a 13. I can trap 140's all day and run consistent 14's. But at the end of the day my car is still a 14 second car. So what you're trying to say is you're a roll racer? I don't get it.

                              His car is choking. He needs headers and a good solid tune. After that we can up his jets and run it all day.

                              Your right it's not a race car, but if he wants to do the gauges so be it. We all know none of the stock gauges are fairly accurate when it comes down to things. Sure he doesn't need it but the LT1 dashes are ugly, and he wants to change it up a bit.
                              Last edited by PWND3r; August 16th, 2009, 11:22 AM.
                              Joe - ATM SQUAD
                              At the shop, watching them build my car.

                              Comment


                              • fred you need serious some practice. 14 flat at a hundred and ten sounds like you spun all through first, and then missed a couple gears. I ran 13.5 with a considerably slower trap at the same shitty track with no prep. Theres definitely nothing mechanically wrong with your car if you trapped 110 with stock manifolds, its running good.


                                Originally posted by PWND3r View Post
                                Doesn't matter what you trap. You still ran a 13. You're an auto and you still ran a 13. I can trap 140's all day and run consistent 14's. But at the end of the day my car is still a 14 second car. So what you're trying to say is you're a roll racer? I don't get it.

                                His car is choking. He needs headers and a good solid tune. After that we can up his jets and run it all day.

                                Your right it's not a race car, but if he wants to do the gauges so be it. We all know none of the stock gauges are fairly accurate when it comes down to things. Sure he doesn't need it but the LT1 dashes are ugly, and he wants to change it up a bit.
                                I cant figure out what the heck you are talking about. you think jeff's car is a 13 second car? you think your own car is a 14 second car? or are you being sarcastic and im not getting it?

                                trap speed matters everything. If you only look at E.T. you only use your car for drag racing. If thats the case, thats fine, drag racing is a skill. but dont be one of those people who claims their 5000 RPM stalled auto on pizza cutters is better than a car that finishes a couple tenths slower but can run an auto-x in half the time as said drag-mobile. Roll races put motor against motor, and the automatic (jeff) is always going to have the disadvantage in a roll race. Im sure he'd love to run you from a dig cause ive seen his car hang tire before.
                                Last edited by JoeliusZ28; August 16th, 2009, 11:56 AM.
                                -Joel
                                1995 Z28 M6 - AI226/234 - autocross ricer
                                1984 Scottsdale K10 - 305/4bbl/4spd


                                WTB List:Midwest Chasis DS Loop

                                Comment

                                Working...
                                X