Tweet
car is look good
-
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic -
at Fred's reply to sam.
Looks great tho, Maybe drop the rear end an inch or so?2000 Trans Am l 1967 Firebird
sigpic
Comment
-
Originally posted by Lucky SOB View Post at Fred's reply to sam.
Looks great tho, Maybe drop the rear end an inch or so?
my car has lowering springs but i put the 17inch rims with a 285 and the springs were sagging on top of that so they rubbed bad. im on a real tight budget so i just bought stock springs from autozone. fixed the rubbing issue. but ya looks jacked upwishing i could drive like joe and the atm squad
Comment
-
Ah I got ya. Time to cut a coil off them
2000 Trans Am l 1967 Firebird
sigpic
Comment
-
Or remove the isolator.Originally posted by Lucky SOB View PostAh I got ya. Time to cut a coil off them
Comment
-
or throw some huge slicks on there and say its a grudge car so it needs to be raked
wishing i could drive like joe and the atm squadComment
-
oh you guys crack me up. but seriously it looks good
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpicComment
-
Needs to go more than 110 to be a grudge carOriginally posted by MunsterZ28 View Postor throw some huge slicks on there and say its a grudge car so it needs to be raked
Car looks good. Get some paint on that thing tho.
Comment
-
i no i was just kiddingOriginally posted by c0ncEpT View PostNeeds to go more than 110 to be a grudge car
Car looks good. Get some paint on that thing tho. thankss
wishing i could drive like joe and the atm squadComment
-
interior wise as of late i have been looking into upgrading to leather seating and doing something along the lines of this with my dash, i personally think it looks amazing and very unique. not to unique because i stole the idea but not something you see everyday
wishing i could drive like joe and the atm squadComment
-
That looks sweet!!! and expensive.....sigpic1994 Camaro Z28 83K M6, CAI, AFR 190cc, 11.6:1, Hooker headers, Hooker ORY, Mangnaflow exhaust, AI 230/238, 1.6 RR, B&M Short throw, Hays clutch, 4.10 gear.
Member: The Mid Michigan Modern Muscle Car Club
Originally Posted by 1BADAIR
manuals should be launched off the limiter and the throttle shouldn't leave the floor til 10 feet after the finish lineComment
-
sigpic
1992 Chevy Camaro 25th Anniversary-SOLD
1992 Chevy Camaro 25th Anniversary
1997 Chevrolet Corvette
The Original
Originally posted by meissenOriginally posted by 81DaytonaPaceCarYep, pretty much...not too often I agree 100% with Darren, but there it is...
Comment
-
cool but pricey2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpicComment
-
wishing i could drive like joe and the atm squadComment
Comment