[Project] its a Munster :-D

[MunsterZ28]

this has been a constant change forward pages to see the most recent updates !!

[meissen]

Make sure you give those part numbers to our sponsors like Creight - here's a list of all the manufacturers he can get parts from: http://cs3automotive.com/?a=PG:421 and when you order from him you usually can get the parts uber speedy. That package with all the cam stuff I put the order in on Thursday morning and had it at my house on Friday.

[MunsterZ28]

Make sure you give those part numbers to our sponsors like Creight - here's a list of all the manufacturers he can get parts from: http://cs3automotive.com/?a=PG:421 and when you order from him you usually can get the parts uber speedy. That package with all the cam stuff I put the order in on Thursday morning and had it at my house on Friday.

im already planning on ordering my gauges and stuff from him, he has good prices, im sure ill be sending him alot of money

[meissen]

[MunsterZ28]

got a small start on my nirtous install pulled the spare tire n what not figured out my bottle placment. do you guys have any tips on where to run the lines and electrical, i want everything to look clean and profesional but dont really have the best ideas on how to run the lines to the engine bay. fyi thats not rust on the wheel well looks like a bad spot tho

also the lid for the ash tray, the hinge is broke on one side and is there a way to replace it? can you with out buying a whole new center peice, and i want the switches to go into there thats reason why i brought it up, is there a compnay that makes something to replace the ash tray for a peice to accept the switches or do i have to fab something up? or has anyone made something to serve such a purpose? any help is greatly appreciated

[97rs4life]

don't forget that I can get you most of that to-do list too.

What kind of bracket setup are you using for the spare tire area? 860 makes a real nice spare tire area mount otherwise. Might want to check that out unless you are fabbing something up yourself. Just get it facing to the front and the correct angle and you are good to go

[MunsterZ28]

i was just going to like fab up the brackets i have to mount it but i just tried and looked for the 860 kit u just metioned, couldnt find it on your site, hey if its easier i might just go with it, fabbing something may save some dough but not stress and time

[94_LT1_Z28]

http://www.gmpartsdirect.com/ is a good place to start for the ashtray door if you want a new one. Mine just broke in my accident so I need one too

[MunsterZ28]

nitrous gauge ordered

[MunsterZ28]

i need some help guys, im almost through with the install of my nitrous, got the bottle in and all the lines run and hooked up. still need to do all wiring tho. but i go to put the plate in today and theres a 3 peices to relocate the throttle bracket i only have 2 i need a L shaped bracket that looks like this. im also email nitrous works to see if i cant get one off them. sponsers can u guys help me out?


edit: wont let me up load pics at the moment????? get some later i suppose

[MunsterZ28]

got it to work

[csmith4153]

Edit: I didnt take the time before posting to see "page 2" for the picture.

[MunsterZ28]

so im having my old high school metal shop teacher make me a new bracket, while hes been doing that i found smoking deals on my fuel pressure gauge and a nice lil shift light lol. they are being delievered but heres some pics off the internet for now


o i already has the nos pressure couldnt beat cmsiths deals

[DETROITMUSCLE]

Did you ever upgrade the fuel pump on that car?

[MunsterZ28]

no i havnt or didnt