hp/tq/ and 1/4 with a 76mm/78mm turbo

[Formula Z]

Re: hp/tq/ and 1/4 with a 76mm/78mm turbo

Final payment made on my huronspeed kit. now waiting patiently to get started

Sent from my SPH-D710 using Tapatalk 2

[Fox Slaughter]

I think he got that and his comment was sarcasm as to play off that bolts going into the coolant passages was somehow better. Mike why do you need to wait until it warms up to work on the car? Its not outside is it? or just unheated garage?

I actually typed that backwards. I meant to say why the LS1 is better than an LT1, no bolts in the coolant passages.

[Formula Z]

Re: hp/tq/ and 1/4 with a 76mm/78mm turbo

Unheated

Sent from my SPH-D710 using Tapatalk 2

[DETROITMUSCLE]

The bolts on an LS1 don't go into the cooling passages...

I think he got that and his comment was sarcasm as to play off that bolts going into the coolant passages was somehow better. Mike why do you need to wait until it warms up to work on the car? Its not outside is it? or just unheated garage?

[c0ncEpT]

Well there it is! Another reason the LT1 is better than the LS1 no bolts into the coolant passages hahaha.

The bolts on an LS1 don't go into the cooling passages...

[Sleeper]

my 98 pcm will only run up to 15#s i understand.

Do yourself a favor and swap to a 0411 PCM. Did it in my 98 and it's easily the best supporting mod I have.

[Fox Slaughter]

Well there it is! Another reason the LT1 is better than the LS1 no bolts into the coolant passages hahaha.

[Nocooler]

No, I've read some threads about people having coolant leak by the studs themselves. Doesn't some of the studs/bolts go into the cooling passages?

Not on a LS1 - maybe on a LT1

[Fox Slaughter]

No, I've read some threads about people having coolant leak by the studs themselves. Doesn't some of the studs/bolts go into the cooling passages?

[c0ncEpT]

Seal what? The head gasket?

[Fox Slaughter]

I've heard people have problems with getting studs to seal.

[Formula Z]

Re: hp/tq/ and 1/4 with a 76mm/78mm turbo

Got my rod bolts and headstuds

Sent from my SPH-D710 using Tapatalk 2

[Formula Z]

Re: hp/tq/ and 1/4 with a 76mm/78mm turbo

Just got a PM that my huron speed turbo kit is almost ready to ship. now if this weather will warm up so i can get started.

Sent from my SPH-D710 using Tapatalk 2

[Nocooler]

Just be-careful if you plan on running fuel through them. Have an extinguisher available.

Trust me - burn treatment is not pleasant.

[1BADAIR]

i wouldnt power them dry