Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Announcement
Collapse
No announcement yet.
87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build
no problem, it all worked out that I had the trailer at the house and didnt have anything going on. Couldnt believe how clean and complete it was when we walked into into that guys place.
'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build
A Bosch 044 fuel pump with a pre and after filter from Russel. Adapted to -8 in and out.
things still wating to be deliverd:
flexplate/spacer/longer bolts
Columbia river mandrel bends 2.5" builder kit
LS1 intake/fuel rail/ported TB/ intake bolts
I orderd some adapters for the fuel injector harness to go from ev6 harness to ev1 injectors and they sent the wrong ones so they sent the right ones today after some fussing.
Racetronics hobs switch and wiring, 2psi activasion.
intercooler
odds and ends -an fittings that where not orderd
Thing yet to be done or orederd:
manual boost controller
vacume manifold
4l80e yoke
cold side plumbing
going tomorrow to joes shop with my harness that will be done in 2 weeks
buddy of mine is helping me out with the vats and the trans part of the PCM so I can start it and load it onto a trailer to get it tuned.
Last edited by masterfab; February 11th, 2013, 05:21 PM.
Ken...Trevor just went through the build thread and is jealous a bit. He wants to order parts for the LeMans so bad now haha
Hahaha. trevor! Stop reading!!! and order parts. You driving yourself crazy with to much information. Pick a direction aim and shoot. lol.
I told you I would help you with anything you need.
Sent from my HTC6435LVW using Tapatalk 2
Tweet
Well Gregg and I just got back with the axle. Thanks for the help buddy.
Comment