Project White Out 2011

[masterfab]

thank you Ken, Im looking them over now I agree, with the oil pump so thats going on the must buy list along with the ring, bearing kit, whats your thoughts on gear driven timing chains, just for the different sound of course.

well find out if the engine has a knock sensor on it. it will be on the side of the block blow the head.i think pass side. if it dont have one then you can use it. the wine will retart the timing if it dose have one.

it will look like this( im sure your engine has one)

[Gregs_gsxr]

yessir I do have one of those

[masterfab]

im sorry cant use the gear drive. im not sure if the knock can be deleted on that engines ecm or not i will have to look.

[Gregs_gsxr]

alright not a big deal, just thought it would be something to be different

[masterfab]

it would be kool though. i will check into deleting it.

[TylerT/AZ28]

didnt that summit oil pump say v6, does it matter?

[birdie2000]

Greg, if you're looking for cheap 1.6 ratio rockers, I have a set of Comp Magnum (these are just roller-tipped like the ones above) that I'll sell for much less than those. I have to check what size stud they are for, but they might prove to be a higher-quality option for less money.

[masterfab]

I'm not sure. I punched the info in and thats what i got. I'm sure there different.

didnt that summit oil pump say v6, does it matter?

[Gregs_gsxr]

Greg, if you're looking for cheap 1.6 ratio rockers, I have a set of Comp Magnum (these are just roller-tipped like the ones above) that I'll sell for much less than those. I have to check what size stud they are for, but they might prove to be a higher-quality option for less money.

Yea Im looking for stock stud size which is 3/8, IIRC PM a price and other details please



also windshield is out

[Gregs_gsxr]

sanded, and Por 15'd the cowl, and the out side of the sub front, cleaned the windshield sill, started to remove the t-top weather stripping, very light and little rust to deal with but under the size of a nickel. I'll post some pics later today for everyone to see

[TylerT/AZ28]

this may sound dumb, and be off topic. but what the heck does IIRC stand for, i see it everywhere and have no understanding of it

[Gregs_gsxr]

this may sound dumb, and be off topic. but what the heck does IIRC stand for, i see it everywhere and have no understanding of it

not a dumb question and to be honest I just learn it about a 2 months ago, but it means IIRC ( If I Remember Correctly)

[TylerT/AZ28]

oh duh that makes sense now. haha

[Gregs_gsxr]

well some more pics,

cowl was sanded are finished



all the old seam sealer was removed




half of the weather stripping was removed, very clean I must say, but Im going to need some new seals, cause I ripped part of it when I was removing it.



new rear bumper I picked up really really cheap, gotta love people that have any idea what their parts are worth, I also picked up a really nice dash pad for 20 bucks too

and the beer was from Jake who stopped by yesterday, Thanks again man !

[Gregs_gsxr]

starting DA sanding more of the car today, Thursday Im going to be picking up more sand paper, primer and maybe a new spray gun.