No F'n raindeer games in my garage !
Announcement
Collapse
No announcement yet.
Project White Out 2011
Collapse
X
-
lame!The Original
Originally posted by 81DaytonaPaceCar
Can you argue that it's "revolutionary"? Perhaps. Just because it's "new" and "different" doesn't mean it's the greatest thing since sliced bread.
Comment
-
quick up date, rear axle is finished, two coats of por15, new seals and LS1 brakes. Thinking about polishing up the calipers instead of painting them but we'll see. no pics at the moment, gotta work at 6 am so maybe when I get home I take some.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Comment
-
old rear end

greasy and very dusty



and the reason the drivers side rear wheel was not centered in the wheel well

and at clean up time for the night


Last edited by Gregs_gsxr; May 8th, 2011, 08:41 PM.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Comment
-
Pictures of new rear!!The Original
Originally posted by 81DaytonaPaceCar
Can you argue that it's "revolutionary"? Perhaps. Just because it's "new" and "different" doesn't mean it's the greatest thing since sliced bread.
Comment
-
Looks good. Haha please tell me that lower control arm was cut while you were trying to get the bushing out. It wasn't like that in the car was it?
- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com

1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven. 
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MI
Comment
-
Oh it was like that on the car, and the reason why in the pics of the car on the trailer it was not centered in the wheel well.Originally posted by meissen View PostLooks good. Haha please tell me that lower control arm was cut while you were trying to get the bushing out. It wasn't like that in the car was it?
thanks, yes I have a list of parts on hold, and on the list is relocation brackets, LCA, and the on car adj PHBOriginally posted by TORN View PostNow get these and you got your self one heck of a rear end.
http://cgi.ebay.com/ebaymotors/Camar...Q5fAccessories
Project looks great so far.Last edited by Gregs_gsxr; May 9th, 2011, 11:32 AM.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Comment
-
Post Whore
- August 16th, 2007
- 2881
- Jim
- 2002 Camaro Z28, 1994 Firebird Formula
- Traverse City, MI
- Send PM
-
yea it was pretty rusty, leaky seal, but its posi and with a lil elbow grease and patience replacing the seals, por15 the whole thing and fresh mobile 1 syn gear oil, it came out perfect specially for being free and saving it from becoming scrap thanks again Jim.Originally posted by birdie2000 View PostDamn, that rear end sure cleaned up compared to when I had it!
Last edited by Gregs_gsxr; May 10th, 2011, 05:30 PM.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Comment




Comment