Announcement

Collapse
No announcement yet.

Project White Out 2011

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • i wish i had 3k
    91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
    85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
    00 Tahoe Z71........Stock
    97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

    Comment


    • Greg, I started to gather information for you setup. Then I remember that I never asked what injectors are you using. Your truck harness will either have MultecII or EV6/UScar connectors if it was a flex fuel vehicle.

      1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
      1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
      1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc

      2006 Saab 9-7x 5.3i Daily Driver

      Comment


      • ah shit, I may have to send you a pic, i want to say it was ev6 cause Im using 42 lb ford mustang injectors
        '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

        " When in doubt...throttle out ! "
        ENVYsion Entertainment Group

        Comment


        • It isn't a big deal, I just ordered new connectors for the Impala harness. $60 for them and the open barrel crimp tool.

          BTW, that is a ton of injector if you plan on running at 58psi, They would be closer to 54lb. It is entirely possible to run them at 43.5 psi though. I have stock 2000 LS1 26.6lb on my 6.0 w/ TR224 cam and long tubes. They are a little small though, they hit 85-90% duty cycle around 6000 rpm.
          Last edited by hoogiesngrinderz; October 10th, 2013, 09:06 AM.

          1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
          1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
          1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc

          2006 Saab 9-7x 5.3i Daily Driver

          Comment


          • I figured they were free and right off the dyno at ford with a few pulls on them. I hope they work
            '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

            " When in doubt...throttle out ! "
            ENVYsion Entertainment Group

            Comment


            • Big things poppin
              Makin Torque.

              Comment


              • shhh…keep it under wraps son!
                '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                " When in doubt...throttle out ! "
                ENVYsion Entertainment Group

                Comment


                • sigpic
                  o·vr·kill [oh-ver-kil]1. an excess of what is required or suitable, as because of zeal or misjudgment.

                  Comment


                  • 3rd gen secrets, sorry Brent….


                    however lets say Im looking for mandral bent tubing in a big size know anyone that has some or can bend it
                    [MENTION=1023]OVRKILL[/MENTION]
                    '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                    " When in doubt...throttle out ! "
                    ENVYsion Entertainment Group

                    Comment


                    • theres a scrap bin full of 4" 75 wall at work if that helps you at all.
                      91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                      85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                      00 Tahoe Z71........Stock
                      97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                      Comment


                      • Originally posted by Gregs_gsxr View Post
                        3rd gen secrets, sorry Brent….


                        however lets say Im looking for mandral bent tubing in a big size know anyone that has some or can bend it
                        @OVRKILL
                        I would start with Gautz....

                        http://www.gautzenterprises.com
                        sigpic
                        o·vr·kill [oh-ver-kil]1. an excess of what is required or suitable, as because of zeal or misjudgment.

                        Comment


                        • Originally posted by Gregs_gsxr View Post
                          3rd gen secrets, sorry Brent….


                          however lets say Im looking for mandral bent tubing in a big size know anyone that has some or can bend it
                          @OVRKILL

                          what size. steel or alum? i have a bunch of random pieces




                          Comment


                          • Originally posted by OVRKILL View Post
                            I would start with Gautz....

                            http://www.gautzenterprises.com
                            This is where my exhaust came from. Really great to deal with and seem like they genuinely care about doing the job right.
                            sigpic

                            355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

                            Comment


                            • Progress pics? Hope it is going good. Looking forward to seeing it come together.
                              sigpic

                              Comment


                              • picked up a hell of a deal on 411 cpm yesterday, should make tuning and wiring way easier now.
                                '91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components

                                " When in doubt...throttle out ! "
                                ENVYsion Entertainment Group

                                Comment

                                Working...
                                X