Charlyne 95 Z28 M6

[JoeliusZ28]

Also how did you mount your shift light? I bought one too figuring on using a hose clamp around the column, but the blinker stalk box thing gets in the way.

[hoogiesngrinderz]

I don't think there is a wrong was to put that emblem on Looks like the angle of the camera is causing an optical illusion

[Darren]

That intake needs color

[JoeliusZ28]

I don't think there is a wrong was to put that emblem on Looks like the angle of the camera is causing an optical illusion

Because of the angle and v-shape of the bumper, it is a one-way fit, and people screw it up all the time because it doesnt look "that bad" applied the wrong way

[my95z28]

Because of the angle and v-shape of the bumper, it is a one-way fit, and people screw it up all the time because it doesnt look "that bad" applied the wrong way

I remember the first time you ever told me about the upside down and I thought you were on crack I can't believe that front bumper has clearcoat pealing, it was painted by a very reputable body shop only 3-4 years ago

[Fox Slaughter]

I remember the first time you ever told me about the upside down and I thought you were on crack I can't believe that front bumper has clearcoat pealing, it was painted by a very reputable body shop only 3-4 years ago

The bumper is peeling because there was a incident in storage a few years ago, involving bumping a Porsche Boxer.

I used double sided tape to put it on top of the column.

Yes I plan on running her this year. Ran her last year. Best of 13.87 at Lapeer with a 2.2 60. Plan on running Milan and Ubly. Hopefully will see 12s on motor.

I'm pretty sure I put the emblem on the exact same way it came off, cause I lined up the marks that were left behind :/

Yes the intake does need color but I just got here driving again and don't wanna tear the intake off just yet! Haha.

[JoeliusZ28]

How solid is it? I was hoping to figure out something better than that

[Fox Slaughter]

It doesn't move at all. Only thing is with the wire pulling down on it, it would tip up a little bit. I accidentally knocked it off today. I might come up with something else, but as I said it doesn't move.

[JoeliusZ28]

Mines a little bigger and the mount isnt very big so im concerned double sided tape isnt gonna cut it. Hmm...

[Fox Slaughter]

Why did you get such a big shift light?!?!?!

Mine adjusts on the top of the light. How does yours adjust?
So I can't mount mine in the A pillar maybe you can mount yours there?

[QuickTop]

Charlyne 95 Z28 M6

I would say turndowns on that exhaust. Sounds good though!

[Fox Slaughter]

In that case I won't because of you!

Took her for another spin today.
Got her on the freeway.
80+ got vibrations, feels like the driveshaft.
I have the pinion angle at 0 currently. Will adjust tomorrow and try again and see.

Currently scanning over a data log.

[JoeliusZ28]

Why did you get such a big shift light?!?!?!

its a digital tach also, but same form factor as your shift light.

[Fox Slaughter]

PSHHHHHHHHHH. What do you need that for? Keep her screaming thats all it needs.

Well I adjusted the pinion angle to -1* today and adjusted the u joint bolts. Vibration has now moved up from 80 to 90. Going to adjust the pinion angle some more.

EDIT:
So I just read suppose to do the pinion angle off the transmission angle using the crank pulley angle. My crank pulley is saying 2*. So the trans is pointing up. Original motor mounts and trans mount as far as I know. I think I should change these out as its causing the motor to dip.

Working on the tune, has some lean spots yesterday so did a quick flash, now I have some rich spots. Work in progress.

Heres the first wash of the year, street trim, 4x4 stance anyone?

DSCN0246.JPG

[Fox Slaughter]

With whip cream sir.

Reddi Whip arrived today.

DSCN0250.JPG