Charlyne 95 Z28 M6

[erk2581]

I won't have a engine done by next month.
The block has to go out and be machined first.
By summer I might have an engine to swap out.
A lane where at?

Milan will work just fine.

Edit:Also jealous of that fine rear.

[Fox Slaughter]

Milan will work just fine.

Edit:Also jealous of that fine rear.

Quit staring at my rear!

I have never been to Milan.

Also thanks Brent I am just trying to keep up with your spending.

[QuickTop]

Charlyne 95 Z28 M6

What was your old rear end ?

[Darren]

What was your old rear end ?

his old rear end is now Micheal's new rear end, kinda fruity if you ask me!

[QuickTop]

Charlyne 95 Z28 M6

his old rear end is now Micheal's new rear end, kinda fruity if you ask me!

Reminds me of when some
Lady told me to share the love.

I think you can imagine te girl.

[Fox Slaughter]

My old rear end was a 10 bolt LSD with 3.42s. Factory Z28 rear.

[dawdaw]

Once this thing gets going are you going to race Taner? six speed lt1 vs six speed lt1

[Fox Slaughter]

Once this thing gets going are you going to race Taner? six speed lt1 vs six speed lt1

Is Taner still running LTx platform?

[dawdaw]

Is Taner still running LTx platform?

Yes, it's an AFR headed, solid roller, 11.x compression, pump gas, single plane, running a fast xfi, with a faceplated t56 and 9" alll with the lovely factory block! Guys super cool to B.S. with, runs at milan alot

[Fox Slaughter]

I was going to say isn't he from Canada?

Hes shooting a lot of nitrous I believe.

[dawdaw]

I was going to say isn't he from Canada?

Hes shooting a lot of nitrous I believe.

ya it goes 10.0s on motor. 8.80's on the 250 or 300 pills. ya he is from canada, right over the border too... he works in michigan though lol

[Fox Slaughter]

Crazy Crazy.

[Fox Slaughter]

Update:

Axle is in. Bolted to the stock Torque Arm until the new one comes Tuesday.
I should of asked someone on here for help, all my friends were busy so I did it by myself. I'm not the brightest rofl.
Darren is finishing up the powder coated stuff as we speak. Should be wrapped up tonight, the rear that is.

[Fox Slaughter]

Update:

Moving along. Got the powder stuff back from Darren. Looks awesome.

DSCN0201.JPG
The powder has arrived home.

DSCN0202.JPG
Springs in the rear.

DSCN0203.JPG
Forgot to rotate the picture and I am lazy. New rear sway links, double adjustable rear shocks, stock springs.

DSCN0204.JPG
The view the other cars will see.

DSCN0205.JPG
Passenger side.

DSCN0206.JPG
Matches my badges I painted last year.

DSCN0207.JPG
The powder under the hood.

DSCN0208.JPG
What it looks like with the fuel line relocation.

DSCN0209.JPG
Close up of the powder under the hood.

[hoogiesngrinderz]

scothbrite that aluminum and lay a coat of clear over it? I think it would do wonders for that color