Announcement

Collapse
No announcement yet.

Charlyne 95 Z28 M6

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Yeah, I just looked at my baseline and I do see knock retard too. All the way up to 12. But yet the spark advance seems unaffected.
    - Brian Meissen
    Owner, MiFBody.com
    Administrator, LTxTech.com


    1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
    2022 Camaro LT1 - "Cherry Bomb 2"
    Michigan FBody Meet & Greet Car Show 2022
    June 4th, 2022 - 9am to 3pm!!!
    The HUB Stadium, Auburn Hills, MI

    Comment


    • Weird Weird Weird.

      This makes me want to get my Megasquirt even sooner hahaha.
      Originally posted by Yoshi94
      Mines about an inch bigger than Kyles. I need to get one of those
      Originally posted by ryanwarby01
      Put it this way, if you have a money tree a LT1 is a wood chipper!
      sigpic

      Comment


      • I zeroed out my low octane tables and it seems to have fixed the problem. From what I've read is when it picks up so much knock it keeps the car in low octane tables (thinking its bad gas) until you restart the car. So I zeroed them out and there is little if any retard. If it is picking up retard its the retarding the "Mystery Timing" the PCM adds. Cause it will run the same timing I command on the table.

        I have been talking to Solomon and he said it was either my Burst Knock or Low Octane tables and I told him I have had my burst knock table zeroed.
        Originally posted by Yoshi94
        Mines about an inch bigger than Kyles. I need to get one of those
        Originally posted by ryanwarby01
        Put it this way, if you have a money tree a LT1 is a wood chipper!
        sigpic

        Comment


        • thanks for the update
          - Brian Meissen
          Owner, MiFBody.com
          Administrator, LTxTech.com


          1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
          2022 Camaro LT1 - "Cherry Bomb 2"
          Michigan FBody Meet & Greet Car Show 2022
          June 4th, 2022 - 9am to 3pm!!!
          The HUB Stadium, Auburn Hills, MI

          Comment


          • So now after I get settled after this late May/June shake up onto bigger and better things that the tune just needs some minor tweaks.
            Originally posted by Yoshi94
            Mines about an inch bigger than Kyles. I need to get one of those
            Originally posted by ryanwarby01
            Put it this way, if you have a money tree a LT1 is a wood chipper!
            sigpic

            Comment


            • Update on weight savings:

              ~80lbs.

              Just pulled the AC compressor out it weighs ~15.5lbs. Now waiting to make a deal on my AC Compressor for a GM AC Delete Pulley. So the car is down currently.
              Now I have some devious ideas going on in my head, but they will have to wait to be released. Fantasies are for in your head, not aloud.
              Originally posted by Yoshi94
              Mines about an inch bigger than Kyles. I need to get one of those
              Originally posted by ryanwarby01
              Put it this way, if you have a money tree a LT1 is a wood chipper!
              sigpic

              Comment


              • Well got the GM AC Delete pulley on yesterday.

                My bumper cover is loose on the driver side where it attaches right at the bottom with a pushpin. I pulled the pin and pushed it back in but its still loose. It rattles when driving. I think the hole in the bumper got enlarged from just moving around. Does any one know how to fix this? I was thinking maybe just putting a bolt through with a washer through it haha.
                Originally posted by Yoshi94
                Mines about an inch bigger than Kyles. I need to get one of those
                Originally posted by ryanwarby01
                Put it this way, if you have a money tree a LT1 is a wood chipper!
                sigpic

                Comment


                • UPDATE TOP SECRET:

                  Here is a little teaser for you guys.

                  559488_3679555184007_1128857949_3417902_908534732_n.jpg
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment


                  • you buy Ricky's block?

                    Not too much of a secret, next... Plus secrets are for pansies...
                    sigpic
                    1992 Chevy Camaro 25th Anniversary-SOLD
                    1992 Chevy Camaro 25th Anniversary
                    1997 Chevrolet Corvette

                    The Original
                    Originally posted by meissen
                    I actually agree with Darren on everything he said...
                    Originally posted by 81DaytonaPaceCar
                    Yep, pretty much...not too often I agree 100% with Darren, but there it is...


                    Comment


                    • Uh-Oh, this build jest went some-what maybe a type of
                      1996 Trans Am WS6 - long term project


                      Comment


                      • no it went wanna be

                        sigpic
                        1992 Chevy Camaro 25th Anniversary-SOLD
                        1992 Chevy Camaro 25th Anniversary
                        1997 Chevrolet Corvette

                        The Original
                        Originally posted by meissen
                        I actually agree with Darren on everything he said...
                        Originally posted by 81DaytonaPaceCar
                        Yep, pretty much...not too often I agree 100% with Darren, but there it is...


                        Comment


                        • Haha yes I bought Rickys block, but the secret is what is going to happen with this engine.
                          Originally posted by Yoshi94
                          Mines about an inch bigger than Kyles. I need to get one of those
                          Originally posted by ryanwarby01
                          Put it this way, if you have a money tree a LT1 is a wood chipper!
                          sigpic

                          Comment


                          • What's not a secret... it's a LT1 and it's going to cost a fortune to make it go fast
                            sigpic

                            355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

                            Comment


                            • Shhhh don't give the secret away. If I was like Brent and had a money tree I would just throw money and it will go fast right?
                              Originally posted by Yoshi94
                              Mines about an inch bigger than Kyles. I need to get one of those
                              Originally posted by ryanwarby01
                              Put it this way, if you have a money tree a LT1 is a wood chipper!
                              sigpic

                              Comment


                              • Put it this way, if you have a money tree a LT1 is a wood chipper!
                                sigpic

                                355 LT1 M6. 232/240 LE cam. 21* Trick Flow heads. Fully ported intake. 58mm TPIS tb. 42# SVO Injectors. LS7 Lifters. Moser 9" TrueTrac w/ 4.22 gears. True Duals. UMI Suspension. LS1 brake swap. Dr. Phil tuned 400ish rwhp. Money Pit.

                                Comment

                                Working...
                                X