its a Munster :-D

[DETROITMUSCLE]

I hope your going to actually mount that bottle lol would hear a lot of clunks and metal on metal if you didn't. Also I think your shift light should be at the bottom and the other two on top of it.

[MunsterZ28]

I hope your going to actually mount that bottle lol would hear a lot of clunks and metal on metal if you didn't. Also I think your shift light should be at the bottom and the other two on top of it.

o ok hmm sounds good, its bracketed in and snug to the spare tire holder its not just sitting in there

[MunsterZ28]

help! ran into a road block today, my gauge pillar wont fit in my car. i no your suppose to cut the vent peice of because its really for a 97-02 but now that i see this i dont wanna hack up a $60 part. the bottom gauge holder is hitting the dash and wont/cant get past it looks like i could possibly slide it is sideways then fit it but then id have to cut th vent peice of for a myabe and cant return it. anybody have any suggestions? delt with this before? i need help !

[meissen]

I don't know if it makes *too* much of a difference, but did you still have the A-pillar installed? In this pic below it looks like the A-pillar is still there...



It almost looks like you have to take the gauge cluster out and then install the A-pillar. Then again, if you had the stock a-pillar in place and you remove that, maybe with it removed you'll have enough room to slip the new a-pillar pod into place.

[MunsterZ28]

I don't know if it makes *too* much of a difference, but did you still have the A-pillar installed? In this pic below it looks like the A-pillar is still there...

It almost looks like you have to take the gauge cluster out and then install the A-pillar. Then again, if you had the stock a-pillar in place and you remove that, maybe with it removed you'll have enough room to slip the new a-pillar pod into place.

hm idk the intructions said to keep the apilar there because its suppose to screw into the apilar itself, maybe if i take the gauge cluster out it might work but ive never done that itll be an experince

[meissen]

Really? Hmm, I've never really looked into the gauge pod pillars so I wasn't aware of that - I thought they were a complete replacement. Let's see if someone else chimes in before you go tearing the interior apart, though.

[MunsterZ28]

Really? Hmm, I've never really looked into the gauge pod pillars so I wasn't aware of that - I thought they were a complete replacement. Let's see if someone else chimes in before you go tearing the interior apart, though.

lol thats wat i was hoping for, lol get half way into and some tells me i dont need to be

[my95z28]

Imo, send that thing back and get a 2 gauge pillar. Doesn't really look like that one is going to fit. Then get this.
http://www.ls1tech.com/forums/new-pr...cd-holder.html
Don't know if you know who that guy is or not, but he is coming up with a lot of cool new stuff for our cars. Fits over that gaping hole under your cd player. Then you can mount either the fuel pressure or nitrous gage down there. Definatly gonna want the shift light on the a-pillar so that you can make sure it shines into your eyes.

[MunsterZ28]

Imo, send that thing back and get a 2 gauge pillar. Doesn't really look like that one is going to fit. Then get this.
http://www.ls1tech.com/forums/new-pr...cd-holder.html
Don't know if you know who that guy is or not, but he is coming up with a lot of cool new stuff for our cars. Fits over that gaping hole under your cd player. Then you can mount either the fuel pressure or nitrous gage down there. Definatly gonna want the shift light on the a-pillar so that you can make sure it shines into your eyes.

im going to look into that for my switches and stuff i was going to try and fab something up like that, but your words came to late lol i already went to town cutting up the triple pilar and got it to fit, cut some spots to fit around the dash pictures in a minute


lol its a wonder what a kid can do with a death wheel in a couple of minutes

[my95z28]

Lol, did you end up cutting off the bottom pod or what? Post some pics when you get a chance.

[MunsterZ28]

Lol, did you end up cutting off the bottom pod or what? Post some pics when you get a chance.

ya i cut like a relief area not the whole bottom, it forms around the dash now. heres some pics

[DETROITMUSCLE]

I was just gonna tell you that you need to hack and whack it on good work.

[MunsterZ28]

I was just gonna tell you that you need to hack and whack it on good work.

lol thanks i was nervous at first then it started to fit and i got real excited

still lot to be done, needs to be fastened to the a-pilar and i need to get all the wiring done, which looks like its going to take awhile to get done right

[csmith4153]

Well, It fits. good work.

[MunsterZ28]

Well, It fits. good work.

lol can i get a exchange i cut a lil much off