hp/tq/ and 1/4 with a 76mm/78mm turbo

[Formula Z]

600-650 rwhp on 93 octane?

Sent from my SPH-D710 using Tapatalk 2

[Superman09]

600-650 rwhp on 93 octane?

Sent from my SPH-D710 using Tapatalk 2

60# will suit you just fine!

[1999Black_Z28]

Quick question, i still have my stock ls1 cam. Would you use that, the 5.3 cam, or get new? I know the z06 cam was mentioned and its priced well, but just thinking. Thanks

Sent from my SPH-D710 using Tapatalk 2

http://ls1tech.com/forums/forced-ind...urbo-cams.html

[Superman09]

http://ls1tech.com/forums/forced-ind...urbo-cams.html

Funny you mention that... Tick is who I am direct with!

[Nocooler]

Speed inc has some badass turbo cams too.

http://www.speedinc.com/catagory.cfm...in%20/%20Heads

[Superman09]

Speed inc has some badass turbo cams too.

http://www.speedinc.com/catagory.cfm...etrain / Heads

Not bad, definitely proven performers, but they have had those around for quite a while. Now there have been some good improvements in lobes!

[1999Black_Z28]

Funny you mention that... Tick is who I am direct with!

I will keep that in mind b/c this is probably my next cam

[Superman09]

I will keep that in mind b/c this is probably my next cam

Yea, definitely let me know! I have it worked out with them that I can have cam's spec'd and get their shelf grinds!

[Formula Z]

Nice!

Sent from my SPH-D710 using Tapatalk 2

[c0ncEpT]

Martin @ Tick is the man.

[Superman09]

Martin @ Tick is the man.

For sure, definitely a cool cat and a great guy to work with!

Any needing a custom ground cam for their application let me know!

[Formula Z]

Nice!

Ill be getting with you for mine sometime this winter

Sent from my SPH-D710 using Tapatalk 2

[t_ank]

http://ls1tech.com/forums/forced-ind...urbo-cams.html

How are these look to be pretty good might invest in one of these better the end of the year. I was just reading up over the weekend on good cams and fi. Glad this was posted!

[Superman09]

How are these look to be pretty good might invest in one of these better the end of the year. I was just reading up over the weekend on good cams and fi. Glad this was posted!

Just an FYI for you, I am direct with Tick, so if you want any of their grinds or want something spec'd custom for your set-up, let me know and I can get it done for you!

Jon

[Speedfreak391]

Nice to see you coming over to the dark side Mike! There are a lot of guys running the ls9 cam. If your on a budget it will work great. If your not spend away man. The Huron speed looks really nice, I almost pulled the trigger on one last week. But I just can't have 2 cars under the knife at the moment. It is relly tempting though, that is a great priced kit!