Project: Go Fast/Giggle Gas

[sman]

Well, summit is on their game lately.

Ordered yesterday 4:30-5pm, came back from lunch a bit ago and found it on my desk!

Going to send my 2 place ashtray switch plate over to my uncle to have him cut me a new one. Cutout, Line lock, bottle heater, arm, purge. Thinking that's all I will need. Anyone who has one, how have you mounted yours? Mine is just floating in the ash try cubby hole.

[sman]

Having never worked with AN fittings and this braided hose stuff before, school me.

Coming off of the blow down fitting on the bottle, I need a 180 to turn the blow down port down twards the ground right? So, what kind of 180 do I need? I see there are all sorts of them, mostly just various ways they connect to the hose, push on, socketless, auto fit? Secondly, when I get this 8an hose to make my blow down tube, will it have ends on it already? How does that work?

Basic setup is bottle in spare tire area, need a 180 off of the blow down port on the bottle, then need about 2ft of hose, which will connect to the bulkhead fitting I already have. Sound right?

[sman]

Also, running projected tip "6" heat range plugs right now. I assume I should order some BR7EF's?

[dawdaw]

Yup that plug is what you want.

[1BADAIR]

Phil will yell. I can't almost bet a million he says tr6

[dawdaw]

^ spray with a projected tip like a tr6?

[1BADAIR]

yeah, he likes them. i sprayed 150 with them in a 382.
francis used 6's with like a 225- 250 shot and never hurt it

[OIF1VET]

I ran TR6's also. About 2 years ago I switched to BR7's. No difference in performance, ran the same numbers at the track.. Guess it is a personal preference. I switched because Nitrous outlet was backing that switch..

[Gregs_gsxr]

should go to see Billy Briggs, I hang out at this shop at least once a week, talk about down to earth. He builds things like this

[sman]

[MENTION=519]1BADAIR[/MENTION] holy hell that's a solid launch, lol! I suppose ill get with Phil then and verify, for now ill just plan on ordering a fresh set of TR6's.

Anyone have an words of advice on the fitting I need? Or the hose?

Also, [MENTION=519]1BADAIR[/MENTION] you gonna help me wire this thing?

[1BADAIR]

maybe. hopefully things slow down some this year even though they told us today that OT was back monday!
how big is the blowoff ? some of the fittings need to be opened up a little so the ID will fit over the disk holder

what hose ? if its the stainless , you dont push lock or any of those. Just the old school an's http://www.jegs.com/i/JEGS-Performan...rentProductId=

[sman]

Don't have any hose yet, but I assume just get the matching hose jegs lists huh?

[1BADAIR]

Actually. Mazza sells hose. Come get this

[sman]

Exactly what I need

You serious about coming and getting it? What do you want for it?

[1BADAIR]

The hose isn't long enough but both fittings should work for ya