Announcement

Collapse
No announcement yet.

Robin's issues - never-ending saga...

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    it even stalled at a light today
    Bingo Bangle Jewelry Design
    http://bingobangle.synthasite.com/



    sigpic

    Comment


    • #62
      Ahhhhhhhhhhhhhh

      Ok so this wannabe-stalling thing, I thought I was gonna die on the way to work this morning. I was going about 75 and my car stopped accelerating. I started pumping the gas pedal hard and fast until finally it acceleated. That was super scary, it's never done that before so I think it's getting worse. I bought a new TPS last night, I'm going to install it tonight along with an O2 sensor.

      Could this be the TPS???
      Bingo Bangle Jewelry Design
      http://bingobangle.synthasite.com/



      sigpic

      Comment


      • #63
        Yep...it could...
        Originally posted by Redd8407
        I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
        Originally posted by Z28ISGR8
        WHY THE F*CK IS THERE A GOAT ON A FERRARI?
        Originally posted by Darren
        I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

        Comment


        • #64
          Sorry that the IAC didn't work I really thought that was whats wrong, my brothers car had the exact same symptoms and that was what was wrong.

          2011 Mustang GT
          20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

          In Progress: Brembo 6-piston brake upgrade


          Comment


          • #65
            Here is an update from robin. It is still not fixed

            "We replaced the O2 sensor and attempted the TPS, but the one I bought was defective. Kyle's going to try getting them to exchange it. My car is still acting up. Dropping RPMs acting like it's going to stall when the pedal is in a certain position. It's the same position every time, and I can make it do it. If I accelerate from a stop only to get up to about 15mph, it stalls. I tried pumping the gas pedal, but it doesn't work. If I accellerate from a stop to get up to about 40mph it acts like it's going to stall - the RPMs drop and speed drops, but if I just hold my foot there it will eventually correct itself in a few seconds. Sometimes I have to pump the gas to get it to accelerate again. At higher speeds like 70 on the highway I have to pump the gas hard and a lot - it's really scary."

            1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

            Comment


            • #66
              That kinda sounds like dead spots in the TPS

              2011 Mustang GT
              20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

              In Progress: Brembo 6-piston brake upgrade


              Comment


              • #67
                Thats exactly what I told her at dawg dogs on friday.

                1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                Comment


                • #68
                  IMO..take it to a Shop that know what they're doing .In other words ,make a living at it ,have ALL the testers etc..
                  Process of illimination mechancis can get to be expensive ...

                  **** FEAR THIS ! ***

                  Comment


                  • #69
                    Originally posted by MiT/A'96 View Post
                    IMO..take it to a Shop that know what they're doing .In other words ,make a living at it ,have ALL the testers etc..
                    Process of illimination mechancis can get to be expensive ...

                    Agreed!!!
                    *A1C ELI* 97 Firebird 3800 Series II
                    A.K.A SLiM

                    Comment


                    • #70
                      yep i would say take it to a shop




                      Comment


                      • #71
                        Originally posted by kammi10 View Post
                        yep i would say take it to a shop
                        X3....

                        **** FEAR THIS ! ***

                        Comment


                        • #72
                          x3ing yourself

                          13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
                          June 10th, 2017 - 9am to 3pm!!!
                          Bakers of Milford, Milford, MI



                          Classics only cost alot if you add up what you spend!

                          sigpic

                          "The winner ain't the one with the fastest car, it's the one who refuses to lose."
                          - Dale Earnhardt -


                          Comment


                          • #73
                            Well I Had my DVOM with me at dawgs last night and I checked robin's tps sensor through its full range. I never saw any drop in voltage when I was slowly opening up the throttle, so the tps is fine. I am buying a fuel pressure guage later today and will be bringing it to dawgs. I believe its a fuel related issue. I heard her car run, when it runs fine it has no problem, The idle is smooth, I hear no vacuum leak at all, She did replace one of her fuel injectors last year so the rest of them may not be working great. The one new one is spraying a better fuel pattern than the rest I know that for sure, But it also may be that her fuel pump is going out.

                            1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                            Comment


                            • #74
                              I know it may sound like a crazy question but have you considered changing the gas cap? I had a problem a couple years ago and all I needed was a new gas cap.

                              Comment


                              • #75
                                A bad gas cap would not cause the car to stall. The evap control systems on an OBD1 car is almost useless exept for purging gas vapors from the tank to relieve pressure. Even in an OBD2 car a bad gas cap would not cause the car to stall. It would cause the "check gas cap" light to come on or if it doesn't have that light the check engine light would come on for a evap leak small meduim or large leak.

                                1989 Stock L98, Holley Stealth Ram intake, Hooker Headers, GMMG cat-back with cat-delete, #24 Bosch D3 Injectors

                                Comment

                                Working...
                                X