Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Alright. I'm also going to do the free ram air mod to push even more air. Seems like I'm running a little rich. So I'm going to try and stuff a lot of air Into the system.
Also anyone have a pic of how the ss hood grill is setup? Weather its inside or outside of the scoop?
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Quit complaining get it to the size you need. Use some glue in the corners then use a cost hanger and pull it into spot.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
And mcalus do you have a spare lt1 can laying around?
Bigger then stock?
cam? No just the stocker.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Post up in the wanted section on LTXtech and ls1tech. You'll find one in no time.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
For couplers just go to lowes or Home Depot and go to the plumbing section and and pick up a 3" fernco coupler. You're going to need to trim the Inside to thin it out some, so it fits over the LT1 throttle body. But that's all you need to connect the lid to the throttle body.
For couplers just go to lowes or Home Depot and go to the plumbing section and and pick up a 3" fernco coupler. You're going to need to trim the Inside to thin it out some, so it fits over the LT1 throttle body. But that's all you need to connect the lid to the throttle body.
Don't use fernco. It's stiff as hell and looks like it belongs on a pipe - because it does! A piece of silicone hose isn't much more expensive.
Tweet
get it to the size you need. Use some glue in the corners then use a cost hanger and pull it into spot.
Comment