N8's eBay Speed Daddy Lt1 headers install

[nascarnate326]

Hey guys the 02 extensions I got appear to be the wrong kind, or I have the 02's in the wrong spot.

Can anyone tell me what goes where as far as plug style? I have a square kind and a rectangle kind.


thanks

[JoeliusZ28]

my car has the flat 4-in-a-row connector on the header 02s.

[nascarnate326]

my car has the flat 4-in-a-row connector on the header 02s.

Does it have the same connector for all 4 02's?


Does anyone have a map of what I should have?


My car has 2 flat and 2 square 02 plugs.

Front left is a flat style, connect with no problems
Back left is a square style, connected with no problems.
Front right is a square style, 8 in too short
Back right is a flat, about 18in too short.


Is this correct?

[JoeliusZ28]

my car is a 95, it never had 4 02s.

[nascarnate326]

Added the last 02 sensor that I can, zip tied the wire to the best spot I could see and got it off jack stands.

Clicked the starter and it started up. I am so relieved.

Exhaust is currently clamped....vibrates pretty bad. Ill get it welded up in the spring.

Sound is/will be damn near perfect. Where the Y goes into my I, I got the wrong size coupler so its still pretty loose. When I reved the car up its much louder and sounds like a muscle car should. Makes me feel bad ass just sitting in my dads barn in the middle of the winter. lol.

The bad, my dead battery is not allowing the car to run as smooth as it can. Not buying a battery till spring. I also have a massive coolant leak now. Must have leaned on a tube going to the water pump because the thermostat area is wet and there was a large puddle under the car.

Project isnt finished yet, but its nice to know it runs. My headers have already started to change color. they are now a bronze/gold/yellow color.

I have a video but its 102mb.....stupid iPhone 4 HD only video.

[nascarnate326]

[ThreeHonks]

front o2 sensors use the flat4 connection, rears are the square type

[nascarnate326]

front o2 sensors use the flat4 connection, rears are the square type

Did you have to have one of each style connector?

[white97z28]

is it just me or does that video have no audio?

[Lucky SOB]

is it just me or does that video have no audio?

it's just you

[MP81]

It worked for me, though it seemed the car wasn't recorded very loudly...

[white97z28]

yea i just realized no sounds from the internet work on my lap top all the sudden =/ wtf

[white97z28]

yea i just realized no sounds from the internet work on my lap top all the sudden =/ wtf

okay works now! Nate! we need gmmg bro! Exhaust sounds just like mine when i got headers...then i threw my cat back away and have just the race bullet welded after y-pipe. Do you have flowmasters on your car?

[MP81]

okay works now! Nate! we need gmmg bro! Exhaust sounds just like mine when i got headers...then i threw my cat back away and have just the race bullet welded after y-pipe. Do you have flowmasters on your car?

Bullets FTW!

DJ is running a pair on his Stang, and I swear, it's the only 5.0 that doesn't sound like one!

[white97z28]

Bullets FTW!

DJ is running a pair on his Stang, and I swear, it's the only 5.0 that doesn't sound like one!

Haha yea now i just wish i could get the pipes ran out the back but i cant find a shop haha