Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Need the entire thing for a camaro. But in my case you also have to figure out something to fill the gap. I was going to do a gauge pod but i dont need that many gauges. My pillar pod is enough. BTW Michael i changed my mind, going to stick with the dual pod i have and just have you work your magic on it.
No problem, it will be $20 less than the quote I gave you.
Wonder if it would look okay with the gap. Id be curious to see what it looks like.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
the gap isnt so much the issue as is finding a way to make the front of the console looks like it belongs there. It doesnt cover up the front console mount and all the wires that run through the area. I wanted to make a gauge pod that covered it all up, but too much PITA. I want the car done.
I should have taken a pic before I took it out. It didnt look too bad, but I wouldnt call it right.
Last edited by JoeliusZ28; February 3rd, 2013, 12:16 PM.
Maybe now is a good time to ask, what company/method of shipping do you guys use? Last 3-4 times ive shipped anything Ive been charged ridiculous prices... not really motivated to ship anything anymore.
Maybe now is a good time to ask, what company/method of shipping do you guys use? Last 3-4 times ive shipped anything Ive been charged ridiculous prices... not really motivated to ship anything anymore.
Stay away from UPS. I go USPS, big items I use parcel post smaller stuff I fit into flat rate boxes...which you can get free from the post office
2011 Ford Raptor SuperCrew SVT Beadlock Wheels Roush Intake, Corsa Exhaust 20" and 40" Light Bars
2000 Camaro Z28 Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator RotoFab Intake, HSRK, Camaro Trans Pan ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors Pat G - 93 Octane Tune Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks CTS-V Calipers, Brembo Pads H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on! sigpic
I use UPS/USPS..UPS/Fed Ex only really differ a few cents for the items that I've shipped.
Joel, I am usually in aurburn hills every other weekend. I dont think we will be going this weekend, if you want to get rid of them really fast someone else can pick them up. But if you dont mind holding onto them, I can let you know the next time we go and I can just grab them from you then?
I use UPS/USPS..UPS/Fed Ex only really differ a few cents for the items that I've shipped.
Joel, I am usually in aurburn hills every other weekend. I dont think we will be going this weekend, if you want to get rid of them really fast someone else can pick them up. But if you dont mind holding onto them, I can let you know the next time we go and I can just grab them from you then?
Well I only work weekdays, im in macomb area on weekends usually.
I always use UPS since we have daily pickup at work. Not sure if we get a discount since we're a company, but I usually find their prices to be reasonable as long as 1.) the object isn't enormous 2.) it isn't being delivered to a residential address in BFE. I've never once had a problem with their service for shipping car parts.
I personally hate USPS because their tracking system blows donkey dicks.
Well, no pictures today since there was virtually nothing to take pictures of, but the new fuel pump sender is installed, as well as the harness 90% of the way (just need to connect the power end, battery isnt in the car anyway).
Making progress even though it doesn't feel like it Tomorrow i am going to pick up some parts i ordered for the front end and hopefully get my A-pillar packaged up.
Last edited by JoeliusZ28; February 9th, 2013, 10:10 PM.
Maybe now is a good time to ask, what company/method of shipping do you guys use? Last 3-4 times ive shipped anything Ive been charged ridiculous prices... not really motivated to ship anything anymore.
[MENTION=254]JoeliusZ28[/MENTION] shoot me a txt, I'll take care of you on this bud.
Maybe now is a good time to ask, what company/method of shipping do you guys use? Last 3-4 times ive shipped anything Ive been charged ridiculous prices... not really motivated to ship anything anymore.
USPS have shipped 1000's of dollars worth of stuf thru the post office. Never had any issue, and always arrived on time or early of thier projected date. Not to mention they are cheaper then both UPS & FedEX
Last edited by WMCC Gary; February 11th, 2013, 10:54 AM.
Tweet
Tomorrow i am going to pick up some parts i ordered for the front end and hopefully get my A-pillar packaged up.
Comment