Nocooler's 00 Firebird

[Boost Addict]

MMM on Sunday???

[Nocooler]

MMM on Sunday???

If I was your age - yes!

Need to finish the install - install the trunnions, and then break in the clutch. Then I can consider the track.

[Nocooler]

Made some progess - no more green clutches for me.

clutch.jpg
bellhousing.jpg

[Nocooler]

2014-07-22 14.34.58.jpg

Bigger - Trans is ready to go in. To friggin hot to deal with it right now. Should have setup the air conditioner in the garage

[dawdaw]

Damn you gotta be sweating your balls off lol... lookin good so far!

[Nocooler]

Couldn't remember if I double checked the torque on the pressure plate bolts - so I started off this morning by removing the bellhousing.

Cracked the 3rd bolt loose and caught my right thumb on the exhaust shield.

4 stitches later.........It'll be a couple days before I make any more progress.

[1999Black_Z28]

Ouch! That's what you get for having exhaust shields! If you had a turbo you wouldn't need them near the bellhousing

[Nocooler]

Back to where I started yesterday - torque verified on pressure plate and bellhousing reinstalled.

I might do some little stuff on the car this afternoon - but between my thumb and the tetanus shot my right arm is pretty gimpy today.

Maybe this weekend I'll get the trans in.

[Nocooler]

another small update - passenger side rockers are done and reinstalled.

[OIF1VET]

Can't wait to see you ripping the gears again..

[Nocooler]

Rockers are done and back on the car:

2014-07-25 13.16.23.jpg

[dawdaw]

Think you'll be good to go mid to late August for stanton jeremy?

[Nocooler]

Think you'll be good to go mid to late August for stanton jeremy?

Like to have it together this next week - and go from there.

Without any other issues I should be good.

[Nocooler]

Trans is in. Had to take the exhaust off - not enough muscle to install it solo with the exhaust on.

[Nocooler]

Made some progress today.

Exhaust is on, driveshaft in, clutch bled, trans filled with 50wt, tune flashed back to m6......

Car starts but some how I wired the clutch switch backwards, so I'll fix that tomorrow and put the interior back together.

Still to do later after everything checks out:
Replace front brakes
rewire all the extras to clean everything up, wb02, n20, line lock, etc.

Edit: clutch pedal is stupid light.....