87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

[Sic96]

I don't know if you have a wheel set for this or not, but if not, I do! My buddy sold me his drag wheel set from his t-type last year, but they stick out too far on my 4th gen. They are centerline wheels with M/T ET streets, non radials. They fit perfect on regals and what not. Skinny's in the front and fatty's in the back. I was going to ask 350.00 this spring. If you're interested, let me know. Didn't read the whole thread to see if you had a set already so sorry if this is a pointless post lol. Lovin the build though!

[masterfab]

Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

I don't know if you have a wheel set for this or not, but if not, I do! My buddy sold me his drag wheel set from his t-type last year, but they stick out too far on my 4th gen. They are centerline wheels with M/T ET streets, non radials. They fit perfect on regals and what not. Skinny's in the front and fatty's in the back. I was going to ask 350.00 this spring. If you're interested, let me know. Didn't read the whole thread to see if you had a set already so sorry if this is a pointless post lol. Lovin the build though!

You have my intrest.

Sent from my HTC6435LVW using Tapatalk 2

[Gregs_gsxr]

Trevor is still stalking this build....

[masterfab]

Trevor is still stalking this build....

thank you. tell trevor to get busy. lol

going to try and get in contact with Dr. phill would like him to tune this car im only going to run it out at 8 to 10 psi for now. when I get the second fuel pump installed and the rear axle I will push it a little harder. hopefully he will tune it it not a corvette or a f-body. and it is older. but we will see. I just want it tuned right so it will last a little while till I get over this sickness and build a motor from the ground up.

[Gregs_gsxr]

that was trevor posting lol. I keep telling him to stop dreaming and thinking so big and get it going.

[masterfab]

Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

that was trevor posting lol. I keep telling him to stop dreaming and thinking so big and get it going.

Lol sneaky. tell him to get a screen name. And get that darn thing going lol.

Sent from my HTC6435LVW using Tapatalk 2

[beertestr]

Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

the ls2 or ls3 cams wont work in the 5.3's

Sure they do. Just need to get the right cam gear and front cover with the CPS on it. You do want want a 3bolt cam, IIRC, ls2 cams from 05-07 are 3 bolt. LS3 is single bolt and there is no 2x cam gear with a single bolt setup.

Sent from my DROID BIONIC using Tapatalk 2

[Gregs_gsxr]

Sure they do. Just need to get the right cam gear and front cover with the CPS on it. You do want want a 3bolt cam, IIRC, ls2 cams from 05-07 are 3 bolt. LS3 is single bolt and there is no 2x cam gear with a single bolt setup.

Sent from my DROID BIONIC using Tapatalk 2

well I guess I should have said its not a direct swap

[masterfab]

Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

Been talking to Dr. phill. Look like I have a tuner for the car. So now that that's squared away, I just need to find a truck and trailor.

Sent from my HTC6435LVW using Tapatalk 2

[Formula Z]

Re: 87 Buick Regal Single 76mm turbo 5.3l/4l80E budget build

Sweet!

Sent from my SPH-D710 using Tapatalk 2

[Sleeper]

Been talking to Dr. phill. Look like I have a tuner for the car. So now that that's squared away, I just need to find a truck and trailor.

Sent from my HTC6435LVW using Tapatalk 2

You got lucky, lol.

[masterfab]

You got lucky, lol.

lol. my next choice was turbo mike in L.A. but he wouldn't be back in Michigan till this summer.

[Gregs_gsxr]

you know I got your truck and trailer, trailer is at the steel shop, get at me with a time frame...I just dont have my straps cause AJ still has them for like a yr

[TylerT/AZ28]

u can borrow the yukon if i ever get this stutter problem fixed.

[Gregs_gsxr]

what wheels are you going to put on this ?