Project White Out 2011

[Gregs_gsxr]

I thought 16s were good enough

for ls on all four corners ?

I honestly cant remember, I have 17s on front and 18s rear but I dont want to leave my chrome wheels on it

[98blackbeauty]

I have a set of 16's yours to just come and get them.

[Gregs_gsxr]

I have a set of 16's yours to just come and get them.

sweet thanks please pm me an addy, Ill be working till about 6 ish

[Gregs_gsxr]

some more goodies are the garage are coming, and picking up some wheels from Larry tomorrow evening to get the rolling into body work without ruining my good wheels.

[Darren]

3rd gens came with 15's and 16's if you have stock rear and brakes all around then they will work. The ones Larry have if are 4th gen wheels will not work for you as rollers unless you have spacers. Or of course its not stock 3rd gen parts.

[TylerT/AZ28]

hes got ls1 rear and brakes as well as ls brakes in front too

[hoogiesngrinderz]

16" 4th gen will bolt up just fine to the rear. It will look very odd, but I fit 4th gen offsets on mine to roll it around. Same with the front but your left to right travel might be limited

[Darren]

16" 4th gen will bolt up just fine to the rear. It will look very odd, but I fit 4th gen offsets on mine to roll it around. Same with the front but your left to right travel might be limited

They rubbed on my car, so might be a car to car thing? I couldnt even roll mine down the driveway on 4th gen wheels, granted this was my old car I tried this on.

[hoogiesngrinderz]

They rubbed on my car, so might be a car to car thing? I couldnt even roll mine down the driveway on 4th gen wheels, granted this was my old car I tried this on.

I found where I was wrong. My 077's (+38mm, came off a 98 Formula) didn't have a problem, but stock rims have a higher offset (+55)

[c0ncEpT]

16's will clear LS1 brakes just fine. 98-02 Z28's and base model Trans Ams came with 16's from the factory.

[Gregs_gsxr]

sounds good, Im just using them just for doing body work and spraying the car. I do have a 4th gen rear, and spacers up front.

[Gregs_gsxr]

well after my uncle and dad came over this morning to help me finish reworking the sub panel in my garage and running some extra outlets, my compressor is up and running. Im still waiting for grainger to get my rubber pucks so I can unbolt it from the pallet. Im not running it this way FYI. I also unbolted the high rise spoiler from the read deck too. I will start sanding on that tomorrow. I started cleaning up and putting half my garage back together, now you can actually see 1 of work benches lol

[Gregs_gsxr]

another step closer, mirrors, locks and windows are out

[TylerT/AZ28]

pictures

[Gregs_gsxr]

pictures

not tonight Im ready for bed, Ill get some after I get home from shooting primer on my buddies lemans, which just came back from media blasting