Announcement

Collapse
No announcement yet.

1996 Camaro Z28 LT1 Project

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I'm not talking E85 here, this guy's claiming that the regular pump gas is bad for fuel pumps.

    1996 Camaro Z28 cam, heads, stall, and a few other goodies
    Alumni Member, MSU Racing Club
    THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
    Originally posted by JasonH
    It's amazing what you can get done when you throw copious amounts of money at something.

    Comment


    • Regular gasoline is classified as E10, or 10% ethanol. If not designed for it, any amounts of ethanol can hurt the fuel system. It is not as common with cars from about 1990 onward to have issues with E10, but it can still happen if it has been weekend by something else. I have also seen higher grades of fuel contain higher amounts of ethanol.
      1996 Trans Am WS6 - long term project


      Comment


      • also, I plan on painting some of the badges on my car. What's the best way to remove badges without damaging them or the car's paint, and what's the best way to reattach them?

        1996 Camaro Z28 cam, heads, stall, and a few other goodies
        Alumni Member, MSU Racing Club
        THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
        Originally posted by JasonH
        It's amazing what you can get done when you throw copious amounts of money at something.

        Comment


        • Real progress? What???


          Removed the bowtie badge from the back of the car:





          You can see that the red paint is coming off in some spots. Looks good from a distance, but close up, not so much. So here's the bowtie badge with the Z28 badge I've had sitting around for a while:





          Sanded them to get ready for paint:





          Then on to the silver paint:





          Then finally, the decals:





          I'm pretty pleased with how it turned out

          1996 Camaro Z28 cam, heads, stall, and a few other goodies
          Alumni Member, MSU Racing Club
          THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
          Originally posted by JasonH
          It's amazing what you can get done when you throw copious amounts of money at something.

          Comment


          • How did you remove the badges? You didn't primer them?
            Originally posted by Yoshi94
            Mines about an inch bigger than Kyles. I need to get one of those
            Originally posted by ryanwarby01
            Put it this way, if you have a money tree a LT1 is a wood chipper!
            sigpic

            Comment


            • The Z28 badge was never on the car (for some reason, when I got it, it had no Z28 badges at all, but it still had the red bowtie on the back). To remove the bowtie, I used a hairdryer to heat it up, then slid a very thin piece of cardboard behind it. I didn't prime, just did 3 coats of color and two coats of clear.

              1996 Camaro Z28 cam, heads, stall, and a few other goodies
              Alumni Member, MSU Racing Club
              THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
              Originally posted by JasonH
              It's amazing what you can get done when you throw copious amounts of money at something.

              Comment


              • nice job they look really good.should be fine.i never used primer when i apinted my badges either.lasted a long time on my irocz.

                Comment


                • Looks nice and it's not the same thing we all see every other day.
                  1998 Chevrolet Camaro Z28 - 6 Speed

                  Comment


                  • That looks great!
                    - Brian Meissen
                    Owner, MiFBody.com
                    Administrator, LTxTech.com


                    1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                    2022 Camaro LT1 - "Cherry Bomb 2"
                    Michigan FBody Meet & Greet Car Show 2022
                    June 4th, 2022 - 9am to 3pm!!!
                    The HUB Stadium, Auburn Hills, MI

                    Comment


                    • You inspired me to get off my butt and paint my badges, cept I got excited and messed up painting them. Look fine from far but up close [x]barfs[x]. So I have them on temp will remove and sand down and paint again. Hahaha.

                      You know the nose bowtie is a removable emblem too right?
                      Originally posted by Yoshi94
                      Mines about an inch bigger than Kyles. I need to get one of those
                      Originally posted by ryanwarby01
                      Put it this way, if you have a money tree a LT1 is a wood chipper!
                      sigpic

                      Comment


                      • yeah I know. for that one I ordered a silver decal that I'll be putting over top of the red.

                        Thanks for all the compliments guys! I got them on the car tonight, but it was too dark for pics. You'll get them tomorrow.

                        1996 Camaro Z28 cam, heads, stall, and a few other goodies
                        Alumni Member, MSU Racing Club
                        THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                        Originally posted by JasonH
                        It's amazing what you can get done when you throw copious amounts of money at something.

                        Comment


                        • got my car out to its first show this year today. It was a BEAUTIFUL day, and a really good show. I took a bunch of pics, maybe I'll get them up later.


                          Here's a close-up of the new badge:



                          rear view:






                          with my brother's '86 Z28:







                          1996 Camaro Z28 cam, heads, stall, and a few other goodies
                          Alumni Member, MSU Racing Club
                          THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                          Originally posted by JasonH
                          It's amazing what you can get done when you throw copious amounts of money at something.

                          Comment


                          • Looks good man, you got me missin the hell out of green right now.
                            1998 Chevrolet Camaro Z28 - 6 Speed

                            Comment


                            • just got the call, tires are in! I'll be heading down to Madison to pick them up this afternoon.

                              1996 Camaro Z28 cam, heads, stall, and a few other goodies
                              Alumni Member, MSU Racing Club
                              THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                              Originally posted by JasonH
                              It's amazing what you can get done when you throw copious amounts of money at something.

                              Comment


                              • so here's what I came back with:





                                size comparison:



                                295s, 275s, then the 255s that were on the car. I was gonna have them on the car today, but when I was changing out one of my rears, I found that one of my lugs is messed up. I'm going to have to change that out tomorrow before I can finish mounting the new wheels. I was also going to remove the bump-stops, but I discovered that they're both rotted out anyway
                                Last edited by alone_and_insane; May 14th, 2012, 10:01 PM.

                                1996 Camaro Z28 cam, heads, stall, and a few other goodies
                                Alumni Member, MSU Racing Club
                                THREE-PEAT MiFbody Meet & Greet "Longest Hauler Award" 2010, 2011, 2012
                                Originally posted by JasonH
                                It's amazing what you can get done when you throw copious amounts of money at something.

                                Comment

                                Working...
                                X