Ok so I have been doing a lot of reaserch on this and lots of people have said that the newer style reverse lipped rear main seal that I used leaks a lot and they are a PITA to install. The fix for this is that everyone is removing the seal and installing it backwards and they say it works like a charm. Anyone ever done this?
Announcement
Collapse
No announcement yet.
Project Never Fast Enough
Collapse
X
-
-
Well I think I may have fixed the coolant leak, one of the little o-rings on the coolant crossover was missing and there was a little pool of coolant right next to it and the bolt was coolant soaked. I put some gasket sealer in place of the ring and then put liquid teflon on both of the bolts. After I let that sit for a few hours I went and tried to start the car again. I was met with nothing at first then a small backfire, tried again and it fired right up and held a better idle than the last few times. I wasn't able to let it run for a real long time but the coolant crossover was dry and no oil leaked out this time at all. If its nice out tomorrow I may drive it outside again and let it run for a while and see if the coolant and oil come back, if there is still oil leaking out then the trans is coming off again.Doing less with more

Comment
-
sounds like a plan2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
I've got my fingers crossed for you man, I know this must be frustrating the hell out of you.
2011 Mustang GT
20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete
In Progress: Brembo 6-piston brake upgrade
Comment
-
I guess I put an end to that plan, came into work this morning and there was a small puddle of oil under the car
Guess the trans is coming down again.Doing less with more

Comment
-
Thanks for all the offers to help guys I truly appreciate it. I probably won't be working on it today because I have a party to go to after work but I'm gonna beg my wife to give me a Saturday or Sunday to try and get it all taken care of and I will post a thread for any of you who could lend a hand. First I'm gonna go get a new rear main seal so I have it if thats the problem and borrow the GM tool from someone, that way I should have everything ready to go and I'll just have to do work. Any ideas of coaxing my wife lol she is going to be hard pressed to give me any free time to work on my car with a 3 week old baby at home.Doing less with more

Comment
-
Car was there first? lol just messin. Explain to her how the intricacies of working on a finely tuned automotive machine hone your creative, physical, mental, and explorative skills. All of which hereforthwith procuring and molding you into the perfect father for your new child.
Cars and women, both are tempermental and take alot of work. Biggest plus on a car is when it pisses you off, you just leave it alone and park it in the garage, and it stays quiet and doesn't complain. Tried locking my girlfriend in the garage one time...not quiet...lots of complaining.
Comment
-
aka "Plum Nuts"
- June 4th, 2008
- 5699
- Larry Meissen
- 1998 Trans Am convertible, 2012 Camaro V6 auto IBM
- Macomb, Michigan
- Realtor
- Send PM
Hah, the words of a new daddy and married man! Man there is no script every woman is different. Good Luck!Originally posted by DETROITMUSCLE View PostThanks for all the offers to help guys I truly appreciate it. I probably won't be working on it today because I have a party to go to after work but I'm gonna beg my wife to give me a Saturday or Sunday to try and get it all taken care of and I will post a thread for any of you who could lend a hand. First I'm gonna go get a new rear main seal so I have it if thats the problem and borrow the GM tool from someone, that way I should have everything ready to go and I'll just have to do work. Any ideas of coaxing my wife lol she is going to be hard pressed to give me any free time to work on my car with a 3 week old baby at home.
sigpic
1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.
Comment
-
Originally posted by erk2581 View PostCar was there first? lol just messin.
That'd go over REALLY well..
- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com

1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven. 
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MI
Comment
-
Originally posted by erk2581 View PostCar was there first? lol just messin. Explain to her how the intricacies of working on a finely tuned automotive machine hone your creative, physical, mental, and explorative skills. All of which hereforthwith procuring and molding you into the perfect father for your new child.
Cars and women, both are tempermental and take alot of work. Biggest plus on a car is when it pisses you off, you just leave it alone and park it in the garage, and it stays quiet and doesn't complain. Tried locking my girlfriend in the garage one time...not quiet...lots of complaining.
that is priceless!
sigpic
1992 Chevy Camaro 25th Anniversary-SOLD
1992 Chevy Camaro 25th Anniversary
1997 Chevrolet Corvette
The Original
Originally posted by meissenI actually agree with Darren on everything he said...Originally posted by 81DaytonaPaceCarYep, pretty much...not too often I agree 100% with Darren, but there it is...
Comment





Comment