Announcement

Collapse
No announcement yet.

Project Never Fast Enough

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ok so I have been doing a lot of reaserch on this and lots of people have said that the newer style reverse lipped rear main seal that I used leaks a lot and they are a PITA to install. The fix for this is that everyone is removing the seal and installing it backwards and they say it works like a charm. Anyone ever done this?
    Doing less with more


    Comment


    • Well I think I may have fixed the coolant leak, one of the little o-rings on the coolant crossover was missing and there was a little pool of coolant right next to it and the bolt was coolant soaked. I put some gasket sealer in place of the ring and then put liquid teflon on both of the bolts. After I let that sit for a few hours I went and tried to start the car again. I was met with nothing at first then a small backfire, tried again and it fired right up and held a better idle than the last few times. I wasn't able to let it run for a real long time but the coolant crossover was dry and no oil leaked out this time at all. If its nice out tomorrow I may drive it outside again and let it run for a while and see if the coolant and oil come back, if there is still oil leaking out then the trans is coming off again.
      Doing less with more


      Comment


      • sounds like a plan
        2011 Ford Raptor SuperCrew
        SVT Beadlock Wheels
        Roush Intake, Corsa Exhaust
        20" and 40" Light Bars

        2000 Camaro Z28
        Stripped Down Drag Car Build

        Project 1999 Camaro Z28


        2009 G8 GT Stryker Blue Metallic-SHEGONE
        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
        RotoFab Intake, HSRK, Camaro Trans Pan
        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
        Pat G - 93 Octane Tune
        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
        CTS-V Calipers, Brembo Pads
        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

        2.55 Lingenfelter Pulley and Injectors waiting to go on!
        sigpic

        Comment


        • I've got my fingers crossed for you man, I know this must be frustrating the hell out of you.

          2011 Mustang GT
          20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

          In Progress: Brembo 6-piston brake upgrade


          Comment


          • It's nice to see a post on the positive side... Good luck!!
            sigpic

            Comment


            • Loud does not describe this car. Ear drum bursting is more accurate. I'll be up there in the morning to finish off those headers Jeff.
              sigpic
              99 Camaro Z28 A4

              Comment


              • Good to hear Jeff!

                I had a few leaks that somehow magically fixed themselves after a few heat cycles. Maybe youll get lucky?
                1999 Camaro - 6 liters of fury.....

                Comment


                • I guess I put an end to that plan, came into work this morning and there was a small puddle of oil under the car
                  Guess the trans is coming down again.
                  Doing less with more


                  Comment


                  • Jeff, I'm free after 5 today, if you need any help please dont hesitate to call. 586 295 0076. Its been awhile since i've seen ya anyways. Give me a ring bud, we'll get that b@$tard goin.

                    Comment


                    • Thanks for all the offers to help guys I truly appreciate it. I probably won't be working on it today because I have a party to go to after work but I'm gonna beg my wife to give me a Saturday or Sunday to try and get it all taken care of and I will post a thread for any of you who could lend a hand. First I'm gonna go get a new rear main seal so I have it if thats the problem and borrow the GM tool from someone, that way I should have everything ready to go and I'll just have to do work. Any ideas of coaxing my wife lol she is going to be hard pressed to give me any free time to work on my car with a 3 week old baby at home.
                      Doing less with more


                      Comment


                      • Car was there first? lol just messin. Explain to her how the intricacies of working on a finely tuned automotive machine hone your creative, physical, mental, and explorative skills. All of which hereforthwith procuring and molding you into the perfect father for your new child.


                        Cars and women, both are tempermental and take alot of work. Biggest plus on a car is when it pisses you off, you just leave it alone and park it in the garage, and it stays quiet and doesn't complain. Tried locking my girlfriend in the garage one time...not quiet...lots of complaining.

                        Comment


                        • Originally posted by DETROITMUSCLE View Post
                          Thanks for all the offers to help guys I truly appreciate it. I probably won't be working on it today because I have a party to go to after work but I'm gonna beg my wife to give me a Saturday or Sunday to try and get it all taken care of and I will post a thread for any of you who could lend a hand. First I'm gonna go get a new rear main seal so I have it if thats the problem and borrow the GM tool from someone, that way I should have everything ready to go and I'll just have to do work. Any ideas of coaxing my wife lol she is going to be hard pressed to give me any free time to work on my car with a 3 week old baby at home.
                          Hah, the words of a new daddy and married man! Man there is no script every woman is different. Good Luck!
                          sigpic
                          1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.

                          Comment


                          • Originally posted by erk2581 View Post
                            Car was there first? lol just messin.
                            That'd go over REALLY well..
                            - Brian Meissen
                            Owner, MiFBody.com
                            Administrator, LTxTech.com


                            1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                            2022 Camaro LT1 - "Cherry Bomb 2"
                            Michigan FBody Meet & Greet Car Show 2022
                            June 4th, 2022 - 9am to 3pm!!!
                            The HUB Stadium, Auburn Hills, MI

                            Comment


                            • Jeff, don't worry. I'll come over and woo Megan and convince her to let you play with your car tomorrow. And if not, we can just lock her in the bathroom.
                              sigpic
                              99 Camaro Z28 A4

                              Comment


                              • Originally posted by erk2581 View Post
                                Car was there first? lol just messin. Explain to her how the intricacies of working on a finely tuned automotive machine hone your creative, physical, mental, and explorative skills. All of which hereforthwith procuring and molding you into the perfect father for your new child.


                                Cars and women, both are tempermental and take alot of work. Biggest plus on a car is when it pisses you off, you just leave it alone and park it in the garage, and it stays quiet and doesn't complain. Tried locking my girlfriend in the garage one time...not quiet...lots of complaining.
                                that is priceless!
                                sigpic
                                1992 Chevy Camaro 25th Anniversary-SOLD
                                1992 Chevy Camaro 25th Anniversary
                                1997 Chevrolet Corvette

                                The Original
                                Originally posted by meissen
                                I actually agree with Darren on everything he said...
                                Originally posted by 81DaytonaPaceCar
                                Yep, pretty much...not too often I agree 100% with Darren, but there it is...


                                Comment

                                Working...
                                X