its a Munster :-D

[DETROITMUSCLE]

I would recommend doing a racetronix kit as well for added insurance.

[MunsterZ28]

I would recommend doing a racetronix kit as well for added insurance.

lol i was really trying to avoid it cuz thats lot of work for a fuel pump but i get what your saying, should i really worry with only a 75 shot tho?

[JoeliusZ28]

edelbrock cylinder heads- edl-61929 - $683.39
edelbrock intake manifold- edl-7107 - $459.95
summit throttle body- sum-227703 - $259.95

if i were you, i would not purchase any of these items and just invest in a good set of ported stock casting heads.

build is looking great though, what are your goals? NA and bottle.

[DETROITMUSCLE]

lol i was really trying to avoid it cuz thats lot of work for a fuel pump but i get what your saying, should i really worry with only a 75 shot tho?

It'll probably work with the factory pump, just trying to give you a little extra piece of mind. I installed mine in approx 2 hours using the trap door method it was pretty damn simple and I would recommend it.

[jetice]

Whats the trap door method? I would really like to know because I have a pending fuel pump change. We just did one on a '95 camaro and it took the guy who was working on it, i believe, 4.5 hours and he is a very good mechanic.

[DETROITMUSCLE]

you can look it up on a few sites but your going to cut the metal right above your gas tank to gain access as opposed to dropping the rear and tank itself. The carpet covers it up just fine and a nice piece of sheetmetal and some self-tapping screws and gasket sealer make it as good as new when done, not to mention next time anything happens its a 15 minute job.

[MunsterZ28]

if i were you, i would not purchase any of these items and just invest in a good set of ported stock casting heads.

build is looking great though, what are your goals? NA and bottle.

oo really? hmm ill look into getting some stock heads ported n polished
im shooting for 11s on bottle idk id like a 11 sec street car

It'll probably work with the factory pump, just trying to give you a little extra piece of mind. I installed mine in approx 2 hours using the trap door method it was pretty damn simple and I would recommend it.

i no what your saying, a buddy of mine told me about that method, makes me nervous to cut into sheet metal tho lol, guess id have some1 who noes what they are doing do it

[meissen]

Only thing I'd be afraid of is the cutting part. I'd be afraid some random spark would leap into the gas tank and ... BOOM!

[DETROITMUSCLE]

sparks couldn't leap into the gas tank unless your assembly wasn't bolted down or you had a hole in the tank you just have to use a zip wheel and be careful.

[MunsterZ28]

hmm its on my mind tho, hey before i go ahead and buy one, does any one have a triple gauge pod for cheap?

i found these,

http://www.glowshiftdirect.com/97-02...illar-pod.aspx

now i know some slight modding has to be done to get this to fit my 96 but besides the autometer one for $60 do you thinks theres a diffrence in why this one is only $27?

with the autometer would you just be paying for the brand? lol idk im scared to buy junk but im trying to be cheap

[JoeliusZ28]

is your car a hardtop?

They dont make a tripple pod for ttop 93-96 camaros that Ive been able to find.

[MunsterZ28]

is your car a hardtop?

They dont make a tripple pod for ttop 93-96 camaros that Ive been able to find.

no its ttop, and no they do not, i guess theres just like a peice for the vent on these ones for the 97-02 models. from what im told you can just cut it off and it fits just fine?

[MunsterZ28]

you can actually see what im talking about in this pic, its like a peice to go around the driver window vent, for the 93-96 u just cut it off

http://store.summitracing.com/partde...5&autoview=sku

[csmith4153]

http://cs3automotive.com/index.php?a=PROD:1215

[MunsterZ28]

http://cs3automotive.com/index.php?a=PROD:1215

ahhh help you have a private message !