Project: Go Fast/Giggle Gas

[sman]

Got injectors, should have them in my possession by the end of the week!

Also, the bottle mount is complete and got it all in the car. Time to start wiring! Will probably start tearing into it this weekend!

7258080394_38375132d5_h.jpg

[1BADAIR]

dont forget the braided line and bulkhead fitting for the blow down tube

[sman]

Braided hose I am getting (dont know what size to get yet), but what is the bulkhead fitting?

[Nocooler]

bulkhead is a longer fitting with a nut on the back side....so you can solidly mount the blow down out the car - you know like straight out the 1/4 panel

[sman]

Oh, so its litterally a bulkhead, lol. I was assuming it was some crazy AN fitting or something.

[Nocooler]

Oh, so its litterally a bulkhead, lol. I was assuming it was some crazy AN fitting or something.

yeah - just has A/N threads on it

[sman]

Who feels like a dumbass.......

[1BADAIR]

kinda like this. i have mine in the bottom of the spare tire wheel

[sman]

Seems like a good spot! What size AN is the blown down tube port on the bottle valve? I cant ever figure that AN crap out.

[1BADAIR]

8 i think. i used a 180 off my bottle

[sman]

Like this?
http://www.amazon.com/Russell-Edelbr.../dp/B002Q3CWFK

[sman]

So, old thread!

Never did install the gas, but feeling motivated today. I ordered a 8an bulkhead fitting for the blowdown tube, before I buy, does anyone have any 8an hose or a 180 fitting?

[c0ncEpT]

How much -8 are you looking for?

PM Jeff. I think we have some spare -8 at the shop.

[kammi10]

i am pretty sure i have a bunch of -8 line.. how much do you need?

[sman]

Just enough to go from the blow down port on the bottle to the floor in the spare tire area where I will be putting the bulkhead. 2ft? How do you put the ends on that stuff?

Sent from my VS980 4G using Tapatalk