I really want to get my Camaro sprayed. Barely needs any body work done to it.. I would just love for the black to match
Announcement
Collapse
No announcement yet.
She's FINALLY going in for paint....
Collapse
X
-
Originally posted by WTP07 View PostHe is going to do what he can with the jambs without getting too far into it. I told him it wasn't a priority at this time. We'll see what he does next week I guess.
My old neighbour helped me pick the colour as a favour. We were going to choose grey, but it changed the whole flavour of the appearance. I paid him the first installment by cheque, and he let me pay the rest when he is done, on my honour. When it gets back to my shop I will savour the odour of the new paint, and hope it doesn't give me a tumour. I really hope you can see the humour here.
I'm being a
I know. 
hahaha
2002 Z28 Camaro A4
1993 Z28 Camaro M6- SOLD
1999 Z28 Camaro M6- SOLD
2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Comment
-
You, sir, fit right in on this siteOriginally posted by WTP07 View PostHe is going to do what he can with the jambs without getting too far into it. I told him it wasn't a priority at this time. We'll see what he does next week I guess.
My old neighbour helped me pick the colour as a favour. We were going to choose grey, but it changed the whole flavour of the appearance. I paid him the first installment by cheque, and he let me pay the rest when he is done, on my honour. When it gets back to my shop I will savour the odour of the new paint, and hope it doesn't give me a tumour. I really hope you can see the humour here.
I'm being a
I know. 
- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com

1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven. 
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MI
Comment
-
WTF is wrong with you Canucks, and WTH can you not properly spell words the way they are meant to be spelled?!Originally posted by WTP07 View PostHe is going to do what he can with the jambs without getting too far into it. I told him it wasn't a priority at this time. We'll see what he does next week I guess.
My old neighbour helped me pick the colour as a favour. We were going to choose grey, but it changed the whole flavour of the appearance. I paid him the first installment by cheque, and he let me pay the rest when he is done, on my honour. When it gets back to my shop I will savour the odour of the new paint, and hope it doesn't give me a tumour. I really hope you can see the humour here.
I'm being a
I know. 
LOL!Nick H.
Current MIFC Vice President
sigpic
Comment
-
Some updates of the work in progress. I apologize for the blurry photos, it's pretty dark in his shop where he is doing the body work...
Driver's side rear quarter - he is going to have to take it out right back past the fuel door and put new steel in.

Passenger's side - not as bad, but still have to roll some new steel in there too

Starting to patch some of the inner fender well on the passenger side: (you can see how much further he took the outer fender down too)

Driver's side inner fender well patched, just needs to be ground down and smoothed over:

You can see here where the new steel is going on the driver's side fender and under the fuel door:

Driver's door sill. A bit of rust under here to clean up too

Some minor hood repair. There were a few small dings and scratches, but nothing major. Yes, he will be taking the scoops out to do under them properly as well.

That's it for now. Hopefully another week or so and she's done. He expects it to be in primer by Friday and painted the start of next week. He has asked for a bit more $$ as there was more rust than he anticipated, but we are still under what I had expected, so all good so far.
More updates to come...stay tuned....1995 Z28 Convertible. SLP CAI, Edelbrock shorty headers, Magnaflow catback, custom tune.
sigpic
Comment
-
Post Whore
- August 16th, 2007
- 2881
- Jim
- 2002 Camaro Z28, 1994 Firebird Formula
- Traverse City, MI
- Send PM
That's a lot of work for $2k-ish IMO! Looks like you're doing it right and not cutting corners. Looking good!
Comment
-
More updates...
left rear QP and below the fuel door. New metal in, almost ready for primer:

front right fender where the plastic was split. Repaired on the rear, still needs to be filled on the front:

Right rear quarter. All new metal under that filler, as well as new metal in the inner fender well...

right side rocker panel. That hole towards the back he made while I was there...slight tap with the body hammer. It's all coming out now and new metal going in about 2/3 of the way to the front.

close up of the right fender well

left rear QP from above:

Sail panel had some bubbling...cleaned up now.

left rocker was in MUCH better shape. He only had to replace a small piece of steel at the back

spoiler was pretty good. Just one low spot to clean up:

He hit me up for some MORE $$ now to replace that rocker...but I needs to be done, so I am biting the bullet and dipping into some suspension budget to get it done right.
Primer by monday he thinks, maybe done completely by next weekend.1995 Z28 Convertible. SLP CAI, Edelbrock shorty headers, Magnaflow catback, custom tune.
sigpic
Comment
-
This is something I need to get done sometime ... my car is falling apart from rust.
- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com

1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven. 
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MI
Comment
-
good thing your doing it right by taking care of the rust issue now, looks like the rocker had been fixed before.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group
Comment
-
Lurker
- March 13th, 2010
- 3476
- TJ
- 1995 Chevy Camaro Z28
- Clinton Twp Michigan
- Powerline Tree Trimmer.
- Send PM
Looks like he does some pretty good work.Originally posted by Yoshi94Mines about an inch bigger than Kyles. I need to get one of thosesigpicOriginally posted by ryanwarby01Put it this way, if you have a money tree a LT1 is a wood chipper!
Comment
-
that's the problem with quoting body work, you never know what you're getting into until you start sanding, then all the bullshit comes out of hiding. You'll hate spending more now, but you'll forget all about it when it's done. Looks like it's going to look new when he's done. I'm sure it'll be worth it.Pacesetter LT's, Pacesetter ORY, full MSD ign., 2 step, rear LCA's, SFC's, B&M Ripper, poly motor mounts, Nitto NT05R's, WS6 wheels, KYB AGX adj. suspension, Eibach Sprotline springs, Trickflow elbow w/K&N, All HVAC deleted w/ delete panel, no AIR, No EGR
96 Z28 Camaro M6
2008 Silverado quad cab LTZ
Comment
-
You speak the truth. I'd rather spend twice as much now and have nothing to worry about for 10+ years as far as rust problems creeping up or paint issues or anything, than cut corners to spend more in other areas and have serious problems a few years down the line.Originally posted by Sic96 View Postthat's the problem with quoting body work, you never know what you're getting into until you start sanding, then all the bullshit comes out of hiding. You'll hate spending more now, but you'll forget all about it when it's done. Looks like it's going to look new when he's done. I'm sure it'll be worth it.
You're doing it right, Randy. I'm excited to see how it turns out, it looks like the work is being done right, I'm sure your car is going to look like new when it's all done.Nick H.
Current MIFC Vice President
sigpic
Comment
-
Body work is complete! He has painted inside the doors and under the hood. Heading to the paint booth tomorrow to do the rest. Hopefully have pics on Monday!
Now if the weather would cooperate so I can drive it home....1995 Z28 Convertible. SLP CAI, Edelbrock shorty headers, Magnaflow catback, custom tune.
sigpic
Comment



Comment