Announcement

Collapse
No announcement yet.

S.B tuning

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    Originally posted by Phantom383 View Post
    No boost here unless you count my foot
    What's messed up?

    My compression is 10.7:1 about and yes she is rich
    When I dynoed the car last year the exhaust burned your eyes
    I was running the NGK TR55 plugs but switched to the TR5 for a hotter spark.

    I don't have a wideband

    The car idles at about 800 with a stumble here and there but not bad.

    I do have a question though:
    Does it look like she is loosing fuel at the top end??
    The car just seems a little funny around that area.

    You know the car is a Speed Density and not a MAF right.

    lol yea I know 93's are sd, actually it looks pig rich at wot. the timimg at ide is messed up for sure it prolly bounces around real bad at idle. you need to get this car over here so i can fix it. lol
    SB tuning for all your porting and tuning needs.
    For custom engine builds please call
    810-689-8286

    Haters never win and winners never hate

    Comment


    • #62
      tr55 = same heat range as tr5. the 55 is set at .050 if its too rich put a hotter plug in it so its dosen't foul as easy
      SB tuning for all your porting and tuning needs.
      For custom engine builds please call
      810-689-8286

      Haters never win and winners never hate

      Comment


      • #63
        I might have missed this but what do you charge for tuning? If it isn't too much I might get a 93 octane tune next year. Then in a few years I'll need a H/C tune.

        2011 Mustang GT
        20" Satin Black AMRs with 305/35 & 275/35 MT Street Radials, Saleen Grille, CS Lower Valance, Roush Axleback, GT500 Spoiler, resonator delete

        In Progress: Brembo 6-piston brake upgrade


        Comment


        • #64
          Originally posted by my95z28 View Post
          I might have missed this but what do you charge for tuning? If it isn't too much I might get a 93 octane tune next year. Then in a few years I'll need a H/C tune.
          pm sent
          SB tuning for all your porting and tuning needs.
          For custom engine builds please call
          810-689-8286

          Haters never win and winners never hate

          Comment


          • #65
            Originally posted by BLKHAWK View Post
            tr55 = same heat range as tr5. the 55 is set at .050 if its too rich put a hotter plug in it so its dosen't foul as easy
            Well lets hope we meet up at the M&G

            Can you fix any of it so it will run better now and then tweek it later??

            Is there any books I can get so I understand this stuff better??
            Like Tunning for Idiots



            VicePresident of West Michigan Firebird Club
            A.K.A The Maverick
            http://www.cardomain.com/ride/660128/1
            93 TA Currently Under Construction AGAIN
            2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

            Comment


            • #66
              Originally posted by Phantom383 View Post

              Can you fix any of it so it will run better now and then tweek it later??
              bring her on over and I'll just get it done in a one shot deal lol
              SB tuning for all your porting and tuning needs.
              For custom engine builds please call
              810-689-8286

              Haters never win and winners never hate

              Comment


              • #67
                I won't get over that way till the M&G

                Lots going on so maybe we can do something then??



                VicePresident of West Michigan Firebird Club
                A.K.A The Maverick
                http://www.cardomain.com/ride/660128/1
                93 TA Currently Under Construction AGAIN
                2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

                Comment


                • #68
                  Originally posted by Phantom383 View Post
                  I won't get over that way till the M&G

                  Lots going on so maybe we can do something then??
                  sounds great. when's the m&g btw?
                  SB tuning for all your porting and tuning needs.
                  For custom engine builds please call
                  810-689-8286

                  Haters never win and winners never hate

                  Comment


                  • #69
                    Here is all you need to know
                    It's May 30.

                    http://www.mifbody.com/vbulletin/showthread.php?t=22105



                    VicePresident of West Michigan Firebird Club
                    A.K.A The Maverick
                    http://www.cardomain.com/ride/660128/1
                    93 TA Currently Under Construction AGAIN
                    2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

                    Comment


                    • #70
                      What about mailing the PCM to you, Steve? Maybe Kyle could do that while his car is in storage for the winter?
                      - Brian Meissen
                      Owner, MiFBody.com
                      Administrator, LTxTech.com


                      1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                      2022 Camaro LT1 - "Cherry Bomb 2"
                      Michigan FBody Meet & Greet Car Show 2022
                      June 4th, 2022 - 9am to 3pm!!!
                      The HUB Stadium, Auburn Hills, MI

                      Comment


                      • #71
                        B that's a good idea but there is one isue

                        My issue is that I can't program my car via the port in my car, I have to remove a chip and reprogram it so sending him my computer won't do me any good

                        I gave Steve all the mods that I have done and he did the vodoo that he does with math or what ever and redid all my tables like my Advance, VE Tables or what not.
                        Now when I see him at the M&G he will be able to take my car and see what it's doing and go from there.

                        I'll bring my laptop and all the goodies that I have to the M&G and you will be able to see 1st hand how it's all done

                        BTW Steve, Thanks!
                        Let me know what I owe ya and I'll take care of it.
                        I'll look at it tomorrow.
                        Last edited by Phantom409; January 1st, 2009, 06:38 PM.



                        VicePresident of West Michigan Firebird Club
                        A.K.A The Maverick
                        http://www.cardomain.com/ride/660128/1
                        93 TA Currently Under Construction AGAIN
                        2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

                        Comment


                        • #72
                          Originally posted by Phantom383 View Post
                          B that's a good idea but there is one isue

                          My issue is that I can't program my car via the port in my car, I have to remove a chip and reprogram it so sending him my computer won't do me any good

                          I gave Steve all the mods that I have done and he did the vodoo that he does with math or what ever and redid all my tables like my Advance, VE Tables or what not.
                          Now when I see him at the M&G he will be able to take my car and see what it's doing and go from there.

                          I'll bring my laptop and all the goodies that I have to the M&G and you will be able to see 1st hand how it's all done

                          BTW Steve, Thanks!
                          Let me know what I owe ya and I'll take care of it.
                          I'll look at it tomorrow.
                          No problem hopefully this helps you out. BTW it may idle a little higher now.
                          SB tuning for all your porting and tuning needs.
                          For custom engine builds please call
                          810-689-8286

                          Haters never win and winners never hate

                          Comment


                          • #73


                            Thanks for the heads up.



                            VicePresident of West Michigan Firebird Club
                            A.K.A The Maverick
                            http://www.cardomain.com/ride/660128/1
                            93 TA Currently Under Construction AGAIN
                            2007 2500 Chevy Silverado Crew Cab w/ 6.0L & 3.73's

                            Comment


                            • #74
                              Not sure if youve been following my build (the 5.3 in the v6 camaro) but that probably is going to need alot of tuning, up for it? What would something like that cost?
                              1999 Camaro - 6 liters of fury.....

                              Comment


                              • #75
                                Originally posted by sman View Post
                                Not sure if youve been following my build (the 5.3 in the v6 camaro) but that probably is going to need alot of tuning, up for it? What would something like that cost?
                                hell yea where up for it! pm sent on pricing.
                                SB tuning for all your porting and tuning needs.
                                For custom engine builds please call
                                810-689-8286

                                Haters never win and winners never hate

                                Comment

                                Working...
                                X