Braided Lines

[Schuby87]

Braided Lines

Pricing will be based on interest. The more fittings and line I can order in bulk, the cheaper the lines will be. Based on the BOM for my LS lines I'm looking at ~$130. Again, the point of this thread is a feeler so please post if interested.

And look good.

Will these go from under the car up the back and in. Mine would need to make it to the front fuel rail. 93 style. Ive found them for like 175 or 150 i think it was on line.

I haven't looked in to LT style lines yet as I don't have one but it should be doable. If the only thing different on a '93 from later styles is the length of the line it shouldn't be an issue.

pictures of the red fittings if possible please, any idea on price??

It will be the typical anodized red color. This pic is just for color reference.

ImageUploadedByTapatalk 21360700926.684109.jpg

[Schuby87]

Braided Lines

I dont feel like its a difficult project, but theres value in doing something like this IMO. Im tired of piecing stuff together, took me 5 trips to the parts store to do my front suspension. The racetronix kit obviously wasnt plug and play either... being my first time working with AN lines i figure ill probably buy 3-4 wrong fittings and hold up progress on that too. Aint nobody got time fo dat!

That would be the idea behind offering something like this. Is your car still up in the lift? Maybe I could come by and take a look at LT lines?

[JoeliusZ28]

That would be the idea behind offering something like this. Is your car still up in the lift? Maybe I could come by and take a look at LT lines?

Yessir she's on the lift and wont be going anywhere until i have fuel lines again

[ICEPICK]

II need the 2 lines big and small from the connection under the drivers side front to the top and front of the motor. Probly like a ft n half longer than the 94 up fuel lines.

[Gregs_gsxr]

can you also get teflon braided fuel line ? if so what price we looking at 18 ft worth

[BP_Z28]

Guess I will give some thought to braided lines in the future.

[Schuby87]

Braided Lines

can you also get teflon braided fuel line ? if so what price we looking at 18 ft worth

PTFE is the same as Teflon chemically but it can't be called Teflon because DuPont has it copyrighted. I can quote that for you if I have enough interest for sponsorship.

[Gregs_gsxr]

shoot me a price for me when you get some free time.

[JoeliusZ28]

shoot me a price for me when you get some free time.

X2 let me know what your plan is Brett I'd like to get moving on this project asap.

[Autogeek]

also in for prices on the lines. for the original idea. the fuel lines under the hood for the LS1.

[DMoser]

also in for prices on the lines. for the original idea. the fuel lines under the hood for the LS1.

Once we assemble Brett's LS lines and have a better idea on labor and confirmed material costs, we'll announce final pricing. Right now we're targeting about $129 for the complete set.

[Fox Slaughter]

You're saying replacing the plastic lines for that price correct?

[Schuby87]

You're saying replacing the plastic lines for that price correct?

Correct. Replacement for the rubber lines connecting the fuel rail and the hard line.

[Fox Slaughter]

I was going to say. I just did 6 AN from my sending unit to my rail and it was no where near that price. Haha.

[OVRKILL]

Wrong Schubring. I'm the good looking one.

You've got good genes, but lets not get carried away. You've got a loooong way to go to reach my epic handsomeness

One of my few fails on my build was not using PTFE We may need to get together and fix that problem. Buuuuuddy.....