Tweet
Dash 00-02 camaro
RCA - non adjustable or adjustable. Not Stock
Brake front rotors slotted and drilled.
RCA - non adjustable or adjustable. Not Stock
Brake front rotors slotted and drilled.
-
-
I have rear ls1 rotors you can have, just may need a light turn, they are just drilled, I'll post pics tonight for ya.
LCA's I would get from Founders performance, quality products and wont hurt the wallet either. I have a lot of their products including the non adjustable LCA's'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment Group -
Thank you
Sent from my iPhone using TapatalkComment
-
IMG_0758.jpg
here they are, like i said they could use a light turn to clean them up'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
Cool I will take them how much do you want for them? Where are you located?
Sent from my iPhone using TapatalkComment
-
how about a couple cans of cold Arnold Palmer drinks and you can have them. Im in Commerce twp.'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
23 south to 96 east get off at Novi rd'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
I have some BMR Non Adj LCAs in my garage I need to get rid of.Originally posted by Yoshi94sigpicOriginally posted by ryanwarby01Comment
-
I may have the steam vent. I'll check when I get home.
May also have the dash to that's actually in my car. As I'm not a fan of the 4th gen dashes.Comment
-
^^
Holy hell, did Monty just resurrect from the grave?
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily DriverComment
-
Haha kinda. Just been away from the fbody world for a long while . Been busy with life and ventured in the diesel world. Just seeing everything about Ken blows my mind but it is what it is nobody saw it coming.
I'm just hoping everyone who was done wrong by him can get everything figured out.
To the steam vent that's goes to like all four corners right? I'm pretty sure I got one from Ken actually.Comment
-
Depends, it was different on all sorts of setups. Some had crossovers, some were blocked off at the rear, some had all four corners tied into one.
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily DriverComment
-
Well I got one that goes to all four corners if that will help ya.Comment
-
Steve, do you not have ARP head bolts? TTY bolts are about $50 a set, I have an angle gauge you can use to set them if need be.
I'd really love to help out, being so far away makes it hard to do so.
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily DriverComment
-
Thanks guys I am heading out of town on family vacation for couple days.
The vent hose is from the tube to the radiator. I have a bbk throttle body.
Sounds good about the rotor I work down in novi.
How much for the control arms?
Thanks to everyone for all the help.
Sent from my iPhone using TapatalkComment
Comment