Wtb: 4 channel 9" for 98-02 fbody

[OIF1VET]

I've found a couple, but dudes want to much and not interested in a 14 hour road trip. If anyone see's one within a few hours of the west side, let me know. At this time it must be a 4 channel(abs/tcs). 35 spline, backbraced, no spools, modular iron case. 3.70, 3.75 or possibly 3.89 gear ratio. I've probably forgot some things but you have the idea. Driveshaft included is a plus. Thanks!

Below is one I pm'd on. Can't get him to budge on price and he is 6-7 hours away, 1 way.

Moser 9" with Alum. Moser bolt through case, 35 spline axles, detroit locker, 4ch ABS, 3:70 gears with backing plates. Also has relocation brackets and standard type swaybar mounts welded on.

[farmington]

You know how this will work, don't you? You'll end up settling on something that isn't exactly what you want or pay more than you were thinking about and then 2 or 3 will show up for 75% of the price. So hurry up and buy one, so I can nab one of the cheaper ones. LOL

[OIF1VET]

You know how this will work, don't you? You'll end up settling on something that isn't exactly what you want or pay more than you were thinking about and then 2 or 3 will show up for 75% of the price. So hurry up and buy one, so I can nab one of the cheaper ones. LOL

I am in no hurry.. I'll pass the high priced ones on to u and save the 75% off for me.

[Fbomb]

Ditto. A fab9 is looking good though as I have <2.5 yrs of school left then the car gets some changes warranting its need.

[c0ncEpT]

MWC can get you into a fab 9 for less than you would think. Worth giving them a call at least.

[kammi10]

MWC can get you into a fab 9 for less than you would think. Worth giving them a call at least.

any mwc fab peice is going to cost over 3k and thats with mediocre parts.. which he doesnt want to pay that much..

[OIF1VET]

MWC can get you into a fab 9 for less than you would think. Worth giving them a call at least.

I've been meaning to call them.. Going to see if I can find a deal first.

[c0ncEpT]

any mwc fab peice is going to cost over 3k and thats with mediocre parts.. which he doesnt want to pay that much..

Base package includes housing, Strange nodular center section with spool and choice of gear ratio, 31-35 spline Strange axles w/ street bearings and 2" 12mm metric or 1/2" SAE studs, chrome-moly double adjustable torque arm with crossmember for your application.

Base price is $2750

Add a Backbrace, 4 channel provisions, Powedercoat, and a truetrac

You get $3415 shipped

Now sell your TA for $200 and you have a price of $3215

Now build a standard 9" (prices taken from Brute Speeds website)

Base price of $2620

Add a Truetrac, 4 channel provisions, Powdercoat, and Backbrace

You get $3210

Not to mention a Fab9 is almost 100lbs less than a standard 9"

[kammi10]

Base package includes housing, Strange nodular center section with spool and choice of gear ratio, 31-35 spline Strange axles w/ street bearings and 2" 12mm metric or 1/2" SAE studs, chrome-moly double adjustable torque arm with crossmember for your application.

Base price is $2750

Add a Backbrace, 4 channel provisions, Powedercoat, and a truetrac

You get $3415 shipped

Now sell your TA for $200 and you have a price of $3215

Now build a standard 9" (prices taken from Brute Speeds website)

Base price of $2620

Add a Truetrac, 4 channel provisions, Powdercoat, and Backbrace

You get $3210

Not to mention a Fab9 is almost 100lbs less than a standard 9"

huh thats funny i can build that same 2nd one for around 27-2800 bucks

[c0ncEpT]

huh thats funny i can build that same 2nd one for around 27-2800 bucks

Not on http://brutespeed.com/ you can't.

[kammi10]

Not on http://brutespeed.com/ you can't.

your right.. i find the same things for cheaper else where.. obviously brute speed isnt the best price around

[c0ncEpT]

your right.. i find the same things for cheaper else where.. obviously brute speed isnt the best price around

Its a direct comparison between to known LS1tech vendors. Whos to say you cant call MWC and beat them down on price.

[kammi10]

Its a direct comparison between to known LS1tech vendors. Whos to say you cant call MWC and beat them down on price.

im not gonna argue about it but being that they are both ls1tech sponsors doesnt make a difference.. obviously they both are more expensive.. you just gotta look around and tlak to people and u can find much much better deals

[c0ncEpT]

im not gonna argue about it but being that they are both ls1tech sponsors doesnt make a difference.. obviously they both are more expensive.. you just gotta look around and tlak to people and u can find much much better deals

I thought you told me you liked to argue the other day? Someone as frugal as yourself knows the extremes of "looking around for better deals"

[bigjon88]

I've found a couple, but dudes want to much and not interested in a 14 hour road trip. If anyone see's one within a few hours of the west side, let me know. At this time it must be a 4 channel(abs/tcs). 35 spline, backbraced, no spools, modular iron case. 3.70, 3.75 or possibly 3.89 gear ratio. I've probably forgot some things but you have the idea. Driveshaft included is a plus. Thanks!

Below is one I pm'd on. Can't get him to budge on price and he is 6-7 hours away, 1 way.

Moser 9" with Alum. Moser bolt through case, 35 spline axles, detroit locker, 4ch ABS, 3:70 gears with backing plates. Also has relocation brackets and standard type swaybar mounts welded on.

Road trip!!