Project 421

[Gregs_gsxr]

Sounds good Tony! Is that the stock air intake? Pretty sure those things are obnoxiously restrictive..

port matched First TPI intake and runners, its bigger then the restrictive stockers

edit: see post 175

[Iroc'nthe87]

That's not what i'm talking about.

[TORN]

Thanks! Yea for now I plan to run the stock plastic intake y. Plan to revisit that and the 3 inch cat back after I get the tune nailed totally down.

[C2YT]

What is so special about this First intake? I have never heard of it until a few days ago. Sorry if its off topic.

[Iroc'nthe87]

Torque city bro

[TORN]

Yep Big Block torque in a small block. Makes for a great street car.

[C2YT]

Gotcha, I also heard it flows much much better than the stock tpi. Torque does make for a fun car.

[TORN]

Ordered up some goodies for Christmas, Hooker is making some good stuff for our Third Gens.

80-019_ee4d850e4f3cc6a95cf07fdde890607d5845baf0.jpg

80-026_1e7ce1d9a42a27880b546c9cf28e91ffb8b65462.jpg

80-030_03f71660b8317ed25975a0ce85fa7abf90718841.jpg

[DynoDave]

Sweet!

[TORN]

Hooker T56 crossmember vs Hawks

1226161625_zps52g5ahlk.jpg

1226161620_zpsuvl4u1et.jpg

Hooker is thicker and puts the torque arm on the crossmember and not the transmission.

[white97z28]

looks awesome! I really like the hooker true dual black heart systems

[TORN]

Ran into a little snag the crossmember torque arm bracket hits my manual speedometer conversion on my tail housing. A little modification is in order.

1228161928_zpsw7nwcfzw.jpg

1228161932_zps7nnkdzia.jpg

1228162003a_zpstm30gfce.jpg

[TORN]

All fixed.
1229161432_zpsfn8xsvnp.jpg

1229161814_zpsmy839yuh.jpg

1229161816_zpsjtfcspbj.jpg

[DynoDave]

Those little tweaks...looks like a good solution.

[TORN]

Got to get this thing so it can breath, a little something I have been working on this winter. I still need to trim the top and add the rubber seal but not bad if I may say so.

Also made a aluminum radiator bracket to better bolt the LT1 Fan shroud in place.