Tweet
I got a paint supply warehouse down the street from my work and he gave me a great deal on paint and supplies. (Less then cost to places like Finish Master) Only down fall is I have to buy in gallon amounts, but the plus is it still only cost me $100 for supplies to do the engine bay. I can get the base color in Qt. size. Won't be running out of clear coat anytime soon. He made me promise to not tell any companies what I paid.
-
-
Fuel lines done. Alternator and Power steering hooked up.
Bolted on the rest of the FIRST intake and sensors plus adjusted more wires.
Not much left on the wiring and only need to get a new throttle position sensor and I should be able too drop in the battery and make sure all the sensors are talking to the EBL Flash ECM.Comment
-
That looks great!
Sent from my iPhone using TapatalksigpicTurbo Charged LS1/T56
Comment
-
Stunning!2000 Trans Am l 1967 Firebird
sigpic
Comment
-
Very nice project!-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd
WTB List:Midwest Chasis DS LoopComment
-
I commend you on doing a very nice, and through job!
Originally posted by 81DaytonaPaceCar
Clamaped up tighter than a 15 year old on her first prom date...
Comment
-
Thanks everyone. Its getting closer. Still got to buy a 3 row all aluminum radiator and build a y pipe for the headers before I can do my first start up.Comment
-
I need some help, Should I use the stock speed density TPI rubber intake
Or make my own like this?
Comment
-
make your own91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
00 Tahoe Z71........Stock
97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beaterComment
-
Make one. The stocker is fugly.
Sent from my iPhone using TapatalksigpicTurbo Charged LS1/T56
Comment
-
Hard to say use the stock one when that custom one you posted as an example looks so good!- Brian Meissen
Owner, MiFBody.com
Administrator, LTxTech.com
1994 Camaro LT1 Transplant -
357ci LT1, cammed, stalled, and driven.
2022 Camaro LT1 - "Cherry Bomb 2"Michigan FBody Meet & Greet Car Show 2022
June 4th, 2022 - 9am to 3pm!!!
The HUB Stadium, Auburn Hills, MIComment
-
Done. Just placed an order at http://www.siliconeintakes.com
Heard good things about them, so I hope to be happy when the order shows up.Comment
-
Looking good Tony...keep it up'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
Ditch that entire thing..it's going to choke down that engine big time. Hell, it's restrictive on stock engines.Makin Torque.Comment
-
That FIRST/TPIS intake setup will flow some serious airOriginally posted by Iroc'nthe87 View Post
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily DriverComment
Comment