Announcement

Collapse
No announcement yet.

1993 camaro z28 project thread

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • halos

    IMG_20130401_160527_025.jpgIMG_20130401_192106_432.jpgIMG_20130401_191929_649.jpgIMG_20130401_192237_698.jpgIMG_20130401_191939_494.jpg

    New halos
    New ebony black leather door panels (paid 20$ for the pair) mint
    Installed my Mickey Thompson drag radials. And
    I think that's about it for the day.

    I do need to figure out how to wire up my halos.

    Have them wired to light up with the markers but they won't light. Drivers side at the point of install lit up once
    But now won't light. I only had the drivers side wired passenger was still a stock light.

    Comment


    • Test to make sure they operate properly. Directly hook them to the battery to provide 12v to them and see if they light.
      Then you know they light.
      If it passes then you can tap into the fog light switch so as said when you hit the fogs you will have halos. Or since I can't tell if you have fogs, then the fogs will now be halos.
      Originally posted by Yoshi94
      Mines about an inch bigger than Kyles. I need to get one of those
      Originally posted by ryanwarby01
      Put it this way, if you have a money tree a LT1 is a wood chipper!
      sigpic

      Comment


      • Direct 12V power= no halo.

        So what do I do now? Tested both drivers and passengers side. No luck. Can these be replaced?

        Comment


        • O.o I have no idea but it sounds like they are shot.
          Never had my hands on a set.

          Are they fused?
          Originally posted by Yoshi94
          Mines about an inch bigger than Kyles. I need to get one of those
          Originally posted by ryanwarby01
          Put it this way, if you have a money tree a LT1 is a wood chipper!
          sigpic

          Comment


          • Not that I can see. Just a white and red wire.

            This kinda sucks. But I'll do something custom with them.
            Probably rip em apart and switch out the halo rings with red LEDs, just as a little custom touch

            Comment


            • Those are known as Devil Eyes.

              http://ls1tech.com/forums/ls4-perfor...-complete.html
              Originally posted by Yoshi94
              Mines about an inch bigger than Kyles. I need to get one of those
              Originally posted by ryanwarby01
              Put it this way, if you have a money tree a LT1 is a wood chipper!
              sigpic

              Comment


              • Thanks fox. Any way you could throw a write up my way? Maybe two?

                How to take these apart and how to do the devil eyes?

                Comment


                • Don't know never done them. Just have read that in order to split the headlight housing guys will put them in the oven then pry them apart.

                  http://ls1tech.com/forums/appearance...dlights-3.html
                  Last edited by Fox Slaughter; April 1st, 2013, 08:38 PM.
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment


                  • Thanks again... always help full with the good links lol

                    Comment


                    • Sure thing. I usually can find stuff haha.
                      Originally posted by Yoshi94
                      Mines about an inch bigger than Kyles. I need to get one of those
                      Originally posted by ryanwarby01
                      Put it this way, if you have a money tree a LT1 is a wood chipper!
                      sigpic

                      Comment


                      • thanks

                        yeah normally im pretty savy with a google search or two but with this i havent been able to find anything.

                        now i see how simple it is, thanks again fox

                        Comment


                        • Yupp. Also posted the writeup here for B to approve.
                          Originally posted by Yoshi94
                          Mines about an inch bigger than Kyles. I need to get one of those
                          Originally posted by ryanwarby01
                          Put it this way, if you have a money tree a LT1 is a wood chipper!
                          sigpic

                          Comment


                          • That was a good idea. Let's see howany devils eyes come
                            Out now, I'm thinking about getting the LEDs that change 7 different colors

                            Comment


                            • I changed the color of my halos on my 99 when I had it.

                              http://ls1tech.com/forums/appearance...alo-color.html
                              2002 Z28 Camaro A4
                              1993 Z28 Camaro M6- SOLD
                              1999 Z28 Camaro M6- SOLD
                              2008 Ford Fusion SE - DD
                              -- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
                              sigpic

                              Comment


                              • I'm using the same write up for mine. All in all. Its gonna cost about 12$ to do this. I'm gonna split the headlights tonight then pickup the LEDs and resisters tomorrow.

                                This cars finally becoming what I want and I'm pretty proud of myself for it.

                                But I wouldn't be where I am with it right now if it wasn't for all you guys and your help/advice.

                                Thanks guys

                                Comment

                                Working...
                                X