I personally have had very good luck going to a salvage yard, like LKQ, and scouring around the (gasp), foreign car section for seat brackets. Eric L
Announcement
Collapse
No announcement yet.
Project: PBR-Built Z/28
Collapse
X
-

1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
-
its much easier just to make something that works with these seats then buyign some from another car. u can use 4th gen seat tracks but they sit up very high with these seats... ask me how i knowOriginally posted by prorac1 View PostI personally have had very good luck going to a salvage yard, like LKQ, and scouring around the (gasp), foreign car section for seat brackets. Eric L
Comment
-
Yeah, thats true. I remember you used my spare tracks didnt ya.
1997 Camaro SS #2819 M6, Red, 3.42, 1 of 27, Ttops, BBK shorty headers, Flowmaster cat back, 1.6 rr, LT4 valve springs, ASAM CAI, Centerforce clutch, runs 12s, breaks 10 bolts.
http://s602.photobucket.com/albums/t...20Camaro%20SS/

1963 Plymouth Valiant Signet 200, 6.0 LS3, Carb, Rapid Motorsports Dominator 2X cam.
http://s602.photobucket.com/albums/t...uth%20Valiant/
Comment
-
Well I just drove the car with the driver seat partially installed on the new brackets (only bolted in with the front two bolts). It was pretty solid even like that and I already love the feel of these seats. You definitely get a lot more feed back from the car with them and I dont think any comfort was sacrificed. The stock seats always made my back hurt after about 20 minutes, these might even be an improvement!
The car is on the hoist for an oil change right now... it needed it pretty bad after all the racing this summer. Oil was pretty close to pitch black
But when thats done I am going to drill new holes in my brackets too move the seat forward some because I positioned them too far back. After that I'll start working on the passenger side and get that to the same point. Then all I will need to do is weld the brackets (onto the brackets, lol) for the rear bolts. I make that sound like its easy 
In any case, very happy with these seats so far. I absolutely LOVE how the car feels without all the weight in the back too. The back of the car just wants to come out and play all the time now!
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
\,,/>_<\,,/
- May 11th, 2006
- 10130
- Mark
- 2023 Malibu, 2022 Explorer
- Winston Salem, NC
- Manager of Telecom Engineering
- Send PM
-
novel idea but heck no! these things are a royal pain with the limited tools ive got.Originally posted by SoulTerror View PostMaybe you should make some more of those brackets and sell them
but here are some pictures from today. I wonder how many status updates I can possibly give you guys on just a couple of seats
IMG_8279.JPGIMG_8278.JPGIMG_8276.JPGIMG_8277.JPGIMG_8280.JPG
I need to get rid of those blue speakers. They be cramping my style!-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
aka Purple94Z28
- May 1st, 2009
- 1858
- Nick Kerns
- 1999 BBM z28 Camaro
- Saginaw Michigan
- New Car Sales Consultant
- Send PM
lookin good joel! and if you really hate those speakers just get some sony explods lol....and damn those brackets look awesome you should really make me a set =)))) lol1999 z28 Bright Blue Metallic 1 of 10
1999 z28 Hugger Orange RS 1 of >309 (Sold)
1997 z28 White 6 speed Heads and Cam. (Sold)
1994 z28 PPM auto Cam only (Sold)
1984 sport coupe red 4 cyl (Sold)
Comment
-
Spray paint them redOriginally posted by JoeliusZ28 View Post
I need to get rid of those blue speakers. They be cramping my style!
2011 Ford Raptor SuperCrew
SVT Beadlock Wheels
Roush Intake, Corsa Exhaust
20" and 40" Light Bars
2000 Camaro Z28
Stripped Down Drag Car Build
Project 1999 Camaro Z28
2009 G8 GT Stryker Blue Metallic-SHEGONE
Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
RotoFab Intake, HSRK, Camaro Trans Pan
ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
Pat G - 93 Octane Tune
Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
CTS-V Calipers, Brembo Pads
H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband
2.55 Lingenfelter Pulley and Injectors waiting to go on!
sigpic
Comment
-
best idea evar!Originally posted by s.reef View PostSpray paint them red
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Well, not really a price on them I want to trade for a set that are either black/grey/red and not stockers.Originally posted by Kwazrollinz28 View Posthow much for the speakers?
Might be easier for me to just get new ones and sell these too. Not really a priority right now though.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
how about you come over and help with the brackets, they you can borrow one for the weekend maybe
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Grammar Nazi
- January 10th, 2006
- 6647
- Jonny
- 10' SS Twin Turbo, 17' SS 1LE
- under par
- Huron Speed
- Send PM



Comment