Project: PBR-Built Z/28

[c0ncEpT]

Reading this thread makes me want to bring the pumpkin out of retirement to keep you in line

[kammi10]

Reading this thread makes me want to bring the pumpkin out of retirement to keep you in line

bet you wont.. your too shook

[erk2581]

bet you wont.. your too shook

He can't even keep my slow blue turd in line. Let alone the PBRZ28. Pumpkin is a weak *****.

[DETROITMUSCLE]

he wont need to, eric can handle the light work

[erk2581]

[MENTION=254]JoeliusZ28[/MENTION] knows he has the back tire whenever he's ready for a tall PBR.

[JoeliusZ28]

Whenever I'm ready for a tall PBR? Sounds like were in for a lot of racing this summer

[erk2581]

Whenever I'm ready for a tall PBR? Sounds like were in for a lot of racing this summer

You DO have to beat me to the stripe to earn said beer-flavored-water.

[c0ncEpT]

Joel I will let you use my 15's if Jeff will let you use his 28x10.5S just so you can play the gap band on Eric! Thread derailed!

[JoeliusZ28]

Lines from our sponsor [MENTION=4187]EAA Engineering[/MENTION] are here!

[dawdaw]

Looks good Joel! gonna say those are 6an? You running AN lines from the sending unit to rails? where you running them on the car? I got my car buttoned up last night with paint and i'm going to throw the tank back in it tonight and going to reroute the lines this time since i got an x pipe and ditched the y, didn't like where i had them last time..... you running 8an feed and 6 return? and did you get that power steering alt relo bracket installed you got from me? Kill me now, i want to get my car back on the road now seeing your car almost done, just waiting on MWC to pull there heads out of there asses.

[JoeliusZ28]

Looks good Joel! gonna say those are 6an? You running AN lines from the sending unit to rails? where you running them on the car? I got my car buttoned up last night with paint and i'm going to throw the tank back in it tonight and going to reroute the lines this time since i got an x pipe and ditched the y, didn't like where i had them last time..... you running 8an feed and 6 return? and did you get that power steering alt relo bracket installed you got from me? Kill me now, i want to get my car back on the road now seeing your car almost done, just waiting on MWC to pull there heads out of there asses.

6AN on both sides routed along the driver side of the car from sender to rail. Hopefully i'll get them done today.

Havent done the alt relocation yet, but thats one of the things I plan on doing before spring hits if there is time. I will be adding a power steering cooler at that time also.

[BP_Z28]

Those lines are pppuuurrrttttyy.

[Fox Slaughter]

I routed mine along the rocker.

DSCN0149.JPGDSCN0150.JPGDSCN0151.JPG

The first picture is the driverside front fender well.
Third is on the back of the rear seat well.

[JoeliusZ28]

Well id like to say i got a lot done today but i think the more accurate statement would be I just worked a lot. Also successfully destroyed my dads drop light! Made a lot of progress though. The swaybar took a lot longer than it should have after a disaster with an end link but shes on now. I might have to do it again though, i think i need some beefier u-bolts. Here's some pics from today, the lines are all connected, i need to get them tied up... I gave myself a little too much service length

[TylerT/AZ28]

rear seat floor mod