Needs some zoomies out the hood with the ass end jacked up like that
Announcement
Collapse
No announcement yet.
Project: PBR-Built Z/28
Collapse
X
-
That would be awesome nate. Not sure about saturday yet but ill let you know. I need to figure out what springs i want, i definitely want a higher spring rate and i dont think i want to go quite as low as yours. Im iffy on stranos they seem to ride a little high.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Touche. I had kyles car in mind when i said that. I need to find some examples of LT1s with stranos since they weigh differently.Originally posted by Lucky SOB View Postmy car sits high?
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Thats true! Maybe i should just run those same springs then.Originally posted by Lucky SOB View Posttrue, I'd think the front would actually sit lower with the iron block?-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Those pictures look great. If I own another 4th gen, an SS spoiler will be one of the first things I do.Originally posted by JoeliusZ28 View PostJust picked up the spoiler from brian at masterworks. They did a great job repairing the spoiler, even from the bottom you cannot tell that it was ever damaged and alignment is perfect.
The spoiler definitely needs a good wet sand to match up with the rest of my paint, and I am debating clearing it as well as this is a single stage of black. Not sure if its necessary or not.
I'm glad your happy with how it turned out. I chose not to have it wet sanded it to save you a few bucks as I know your great at detailing/rub outs and then you could match the amount of orange peel or lack of it with the rest of the car.
Comment
-
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
Yep wetsanding it wont be a problem. I will probably do it later this season though. For now there are more important things i would like to address on the car, this is 100x better than it was the way it is!Originally posted by bri2203 View PostThose pictures look great. If I own another 4th gen, an SS spoiler will be one of the first things I do.
I'm glad your happy with how it turned out. I chose not to have it wet sanded it to save you a few bucks as I know your great at detailing/rub outs and then you could match the amount of orange peel or lack of it with the rest of the car.-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd

WTB List:Midwest Chasis DS Loop
Comment
-
That's what I'm running!Originally posted by JoeliusZ28 View Post
that is perfect. I guess stranos and monroes it is! 
Though, when I feel like it, I'll probably switch the rears out to bilsteins as it's a much easier swap than the front and I can't carry much more than 100+ lbs without the tire hitting on larger bumps.2000 Trans Am l 1967 Firebird
sigpic
Comment



Comment