Announcement

Collapse
No announcement yet.

Anyone want to buy a 4th gen Spohn Torque Arm?

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 3
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • #16
    Originally posted by meissen View Post
    I don't know what I'm going to do - I don't have the coin to drop on getting a replacement brace... Looks like I either have to live with it or go back to stock.
    brian you could prob get that one modified to make ti work and tuck it up better for cheaper than buying the replacement.. talk to [MENTION=263]c0ncEpT[/MENTION] and i know he has a good buddy with a fab shop called "Romeo Fab" who could prob very easily do the work




    Comment

    • #17
      Originally posted by meissen View Post
      I don't know what I'm going to do - I don't have the coin to drop on getting a replacement brace... Looks like I either have to live with it or go back to stock.
      I have a UMI crossbrace laying in the basement, if it'll work for you, I'll give you a good deal on it. . .
      Nick H.
      Current MIFC Vice President

      sigpic

      Comment

      • #18
        I will never buy a Spohn product. I'm glad I didn't pay for any of their crap that is on my IROC right now!

        1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
        1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
        1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc

        2006 Saab 9-7x 5.3i Daily Driver

        Comment

        • #19
          My UMI tunnel mount sits no lower than my Quicktime bell housing or exhaust. I will try to get a picture tomorrow, any the front bumper is sitting 6" off the ground right now.
          Originally posted by Yoshi94
          Mines about an inch bigger than Kyles. I need to get one of those
          Originally posted by ryanwarby01
          Put it this way, if you have a money tree a LT1 is a wood chipper!
          sigpic

          Comment

          • #20
            Originally posted by 93formulalt1 View Post
            I have a UMI crossbrace laying in the basement, if it'll work for you, I'll give you a good deal on it. . .
            Wonder if the Spohn torque arm will still bolt to it? do you have a pic?
            - Brian Meissen
            Owner, MiFBody.com
            Administrator, LTxTech.com


            1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
            2022 Camaro LT1 - "Cherry Bomb 2"
            Michigan FBody Meet & Greet Car Show 2022
            June 4th, 2022 - 9am to 3pm!!!
            The HUB Stadium, Auburn Hills, MI

            Comment

            • #21
              This is how mine sits.

              DSCN0239.JPG

              With the nose sitting this high off the ground.

              DSCN0242.JPG
              Originally posted by Yoshi94
              Mines about an inch bigger than Kyles. I need to get one of those
              Originally posted by ryanwarby01
              Put it this way, if you have a money tree a LT1 is a wood chipper!
              sigpic

              Comment

              • #22
                Looks like you also have much bigger tires than I do on the rear......
                - Brian Meissen
                Owner, MiFBody.com
                Administrator, LTxTech.com


                1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                2022 Camaro LT1 - "Cherry Bomb 2"
                Michigan FBody Meet & Greet Car Show 2022
                June 4th, 2022 - 9am to 3pm!!!
                The HUB Stadium, Auburn Hills, MI

                Comment

                • #23
                  Psh I just put the 275/40/17s back on and brought the front end up, shes pretty even now. Still has to have least 5in to the ground.
                  Originally posted by Yoshi94
                  Mines about an inch bigger than Kyles. I need to get one of those
                  Originally posted by ryanwarby01
                  Put it this way, if you have a money tree a LT1 is a wood chipper!
                  sigpic

                  Comment

                  • #24
                    What shocks and springs do you have?
                    - Brian Meissen
                    Owner, MiFBody.com
                    Administrator, LTxTech.com


                    1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                    2022 Camaro LT1 - "Cherry Bomb 2"
                    Michigan FBody Meet & Greet Car Show 2022
                    June 4th, 2022 - 9am to 3pm!!!
                    The HUB Stadium, Auburn Hills, MI

                    Comment

                    • #25
                      Stock springs in rear. 300lbs in the front on coilovers. Double adjustable shocks in the rear.
                      Originally posted by Yoshi94
                      Mines about an inch bigger than Kyles. I need to get one of those
                      Originally posted by ryanwarby01
                      Put it this way, if you have a money tree a LT1 is a wood chipper!
                      sigpic

                      Comment

                      • #26
                        Sounds like I need to get stock springs in the back at the very least then.
                        - Brian Meissen
                        Owner, MiFBody.com
                        Administrator, LTxTech.com


                        1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                        2022 Camaro LT1 - "Cherry Bomb 2"
                        Michigan FBody Meet & Greet Car Show 2022
                        June 4th, 2022 - 9am to 3pm!!!
                        The HUB Stadium, Auburn Hills, MI

                        Comment

                        • #27
                          Then you get a 4x4 haha.
                          Originally posted by Yoshi94
                          Mines about an inch bigger than Kyles. I need to get one of those
                          Originally posted by ryanwarby01
                          Put it this way, if you have a money tree a LT1 is a wood chipper!
                          sigpic

                          Comment

                          • #28
                            after looking at this again.. brian do you have this mounted on top of the subframe connector where it mounts to the body?
                            [MENTION=193]meissen[/MENTION]




                            Comment

                            • #29
                              Yessir - should it be the other way around? Combined with the 1" spacers I just installed, that might make enough of a difference that it wouldn't scrape anymore.
                              - Brian Meissen
                              Owner, MiFBody.com
                              Administrator, LTxTech.com


                              1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                              2022 Camaro LT1 - "Cherry Bomb 2"
                              Michigan FBody Meet & Greet Car Show 2022
                              June 4th, 2022 - 9am to 3pm!!!
                              The HUB Stadium, Auburn Hills, MI

                              Comment

                              • #30
                                Originally posted by meissen View Post
                                Yessir - should it be the other way around? Combined with the 1" spacers I just installed, that might make enough of a difference that it wouldn't scrape anymore.
                                yes it is supposed to go underneath the subframe connectors




                                Comment

                                Previous 1 2 3 template Next
                                Working...
                                X